AutoCad to Visio Dimension issue

[Automation Guy]

I opened an AutoCad file that used metric dimensions. Visio shows inches. How
do I convert and have the picture show up the same?

 

[Chris Roth [Visio MVP]]

Hi AG,

Instead of opening the .dwg directly in Visio, start a blank drawing,
then go to Insert > CAD Drawing. This will give you a wizard with some
options. Hopefully that will get you a bit closer.

--
Hope this helps,

Chris Roth
Visio MVP


Visio Guy: Smart Graphics for Visual People

Articles: http://www.visguy.com
Shapes: http://www.visguy.com/shapes
Dev: http://www.visguy.com/category/development/
Forum: http://www.viguy.com/vgforum

 

[Automation Guy]

It is still not a direct import. I set up the page as millimeters. I answered
the query about the Cad drawing's dimensions as being millimeters. Still no
luck.

 

[James Wittrell]

I am not sure what steps you are using to start a new drawing however go to
File > New > New Drawing (Metric). Once the new drawing is opened go to
insert > CAD Drawing. When the drawing is inserted into the drawing page
all measurements should now be in Metric. If Metric is not available that
could mean it was not installed.

James W.

--------------------
Thread-Topic: AutoCad to Visio Dimension issue
thread-index: Acn5ywr+zxjN68gFQNq4yxFZkRvvqA==
X-WBNR-Posting-Host: 198.70.35.1
From: =?Utf-8?B?QXV0b21hdGlvbiBHdXk=?= <Automation
(e-mail address removed)>
Subject: AutoCad to Visio Dimension issue
Date: Tue, 30 Jun 2009 14:38:01 -0700
Lines: 2
Message-ID: <[email protected]>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.3168
Newsgroups: microsoft.public.visio.general
Path: TK2MSFTNGHUB02.phx.gbl
Xref: TK2MSFTNGHUB02.phx.gbl microsoft.public.visio.general:13042
NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
X-Tomcat-NG: microsoft.public.visio.general

I opened an AutoCad file that used metric dimensions. Visio shows inches.
How
do I convert and have the picture show up the same?