compile error in hidden module: sheet1

D

deen

Hi,

I was use the code below mention in macro, in office2002 its working
fine, i have to run office2000 it was show error like : compile error
in hidden module: sheet1

kindly advice me what shall i want to do.

Sheet1 Code:
Private Sub Worksheet_Calculate()
Range("X12").EntireRow.Hidden = (Range("X12").Value = 0)
Range("X13").EntireRow.Hidden = (Range("X13").Value = 0)
End Sub

Private Sub CommandButton5_Click()
Dim cell As Range
Range("D9:D13").ClearContents
MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
End Sub

Private Sub CommandButton6_Click()
ActiveWorkbook.Save
MsgBox "SAVED SUCESSFULLY"
End Sub
Private Sub CommandButton7_Click()
On Error Resume Next
Range("C7:E21,E6,F6,F12,F13").PrintPreview
On Error GoTo 0
End Sub

Private Sub CommandButton8_Click()
Application.Quit
MsgBox "CLOSED SUCESSFULLY"
ActiveWorkbook.Close savechanges:=Flase
End Sub

Private Sub CommandButton2_Click()
Dim cell As Range
Range("D9:D13").ClearContents
MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
End Sub
Private Sub Calendar1_Click()
ACTIVECELL.Value = CDbl(Calendar1.Value)
ACTIVECELL.NumberFormat = "DD/MM/yyyy"
ACTIVECELL.Select

End Sub

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Application.Intersect(Range("F6,D9,D10"), Target) Is
Nothing Then
Calendar1.Left = Target.Left + Target.Width - Calendar1.Width
Calendar1.Top = Target.Top + Target.Height
Calendar1.Visible = True
' select Today's date in the Calendar
Calendar1.Value = Date
ElseIf Calendar1.Visible Then Calendar1.Visible = False
End If

If ACTIVECELL.Address = Range("C7").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C9").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C10").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C11").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C12").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C13").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D14").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C15").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C16").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C17").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(1, 0).Select
End If
If ACTIVECELL.Address = Range("C18").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C19").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C20").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("C21").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D15").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D16").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D17").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D18").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D19").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D20").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("D21").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E6").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E9").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E10").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E11").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E12").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E15").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E16").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E17").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E18").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E19").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E20").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E21").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("E27").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("X12").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("X13").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("Y8").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("Y9").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If
If ACTIVECELL.Address = Range("Y10").Address Then
pword = InputBox("Enter Password To Edit State:")
If pword = "deen01" Then ACTIVECELL.Select Else
ACTIVECELL.Offset(0, 0).Select
End If


End Sub
Private Sub CommandButton1_Click()
On Error Resume Next
Range("C7:E21,E6,F6,F12,F13").PrintPreview
On Error GoTo 0
End Sub


Private Sub CommandButton3_Click()
Application.Quit
MsgBox "CLOSED SUCESSFULLY"
ActiveWorkbook.Close savechanges:=Flase
End Sub

Private Sub CommandButton4_Click()
ActiveWorkbook.Save
MsgBox "SAVED SUCESSFULLY"
End Sub


Workbook code is:


Private Sub Workbook_Activate()
Dim bar As CommandBar
For Each bar In Application.CommandBars
bar.Enabled = False
Next
fbar = Application.DisplayFormulaBar
Sbar = Application.DisplayStatusBar
With Application
.DisplayFormulaBar = False
.DisplayStatusBar = False
End With
End Sub
Private Sub Workbook_Deactivate()
Dim bar As CommandBar
For Each bar In Application.CommandBars
bar.Enabled = True
Next
fbar = Application.DisplayFormulaBar
Sbar = Application.DisplayStatusBar
With Application
.DisplayFormulaBar = True
.DisplayStatusBar = True
End With

End Sub

Private Sub Workbook_Open()

MsgBox "CREATED BY MOHAMMED & MUTHU, BANGALORE TEAM,IF ANY QUERY-
SUGGESTION FEEL FREE CT:+919986636272 E-
MAIL:[email protected]"

End Sub


Module 1 code is:

Option Explicit
'Main Function
Function deen(ByVal MyNumber)

Dim Rupees, Paise, Temp
Dim DecimalPlace, Count
ReDim Place(9) As String
Place(2) = " Thousand "
Place(3) = " Lac "
Place(4) = " Crore "
Place(5) = " Arab " ' String representation of amount
MyNumber = Trim(Str(MyNumber)) ' Position of decimal place 0
if none
DecimalPlace = InStr(MyNumber, ".")
'Convert Paise and set MyNumber to Rupee amount
If DecimalPlace > 0 Then
Paise = GetTens(Left(Mid(MyNumber, DecimalPlace + 1) &
"00", 2))
MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))
End If
Count = 1
Do While MyNumber <> ""
If Count = 1 Then Temp = GetHundreds(Right(MyNumber, 3))
If Count > 1 Then Temp = GetHundreds(Right(MyNumber, 2))
If Temp <> "" Then Rupees = Temp & Place(Count) & Rupees
If Count = 1 And Len(MyNumber) > 3 Then
MyNumber = Left(MyNumber, Len(MyNumber) - 3)
Else
If Count > 1 And Len(MyNumber) > 2 Then
MyNumber = Left(MyNumber, Len(MyNumber) - 2)
Else
MyNumber = ""
End If
End If
Count = Count + 1
Loop
Select Case Rupees
Case ""
Rupees = "No Rupees"
Case "One"
Rupees = "One Rupee"
Case Else
'Rupees = Rupees & " Rupees"
Rupees = "Rupees " & Rupees

End Select
Select Case Paise
Case ""
'Paise = ""
Paise = " Only"
Case "One"
Paise = " and One Paisa"
Case Else
Paise = " and " & Paise & " Paise"

End Select
deen = Rupees & Paise
End Function
'*******************************************
' Converts a number from 100-999 into text *
'*******************************************
Function GetHundreds(ByVal MyNumber)
Dim Result As String
If Val(MyNumber) = 0 Then Exit Function
MyNumber = Right("000" & MyNumber, 3) 'Convert the hundreds
place
If Mid(MyNumber, 1, 1) <> "0" Then
Result = GetDigit(Mid(MyNumber, 1, 1)) & " Hundred "
End If
'Convert the tens and ones place
If Mid(MyNumber, 2, 1) <> "0" Then
Result = Result & GetTens(Mid(MyNumber, 2))
Else
Result = Result & GetDigit(Mid(MyNumber, 3))
End If
GetHundreds = Result
End Function
'*********************************************
' Converts a number from 10 to 99 into text. *
'*********************************************
Function GetTens(TensText)
Dim Result As String
Result = "" 'null out the temporary function value
If Val(Left(TensText, 1)) = 1 Then ' If value between 10-19
Select Case Val(TensText)
Case 10: Result = "Ten"
Case 11: Result = "Eleven"
Case 12: Result = "Twelve"
Case 13: Result = "Thirteen"
Case 14: Result = "Fourteen"
Case 15: Result = "Fifteen"
Case 16: Result = "Sixteen"
Case 17: Result = "Seventeen"
Case 18: Result = "Eighteen"
Case 19: Result = "Nineteen"
Case Else
End Select
Else ' If value between 20-99
Select Case Val(Left(TensText, 1))
Case 2: Result = "Twenty "
Case 3: Result = "Thirty "
Case 4: Result = "Forty "
Case 5: Result = "Fifty "
Case 6: Result = "Sixty "
Case 7: Result = "Seventy "
Case 8: Result = "Eighty "
Case 9: Result = "Ninety "
Case Else
End Select
Result = Result & GetDigit _
(Right(TensText, 1)) 'Retrieve ones place
End If
GetTens = Result
End Function
'*******************************************
' Converts a number from 1 to 9 into text. *
'*******************************************
Function GetDigit(Digit)
Select Case Val(Digit)
Case 1: GetDigit = "One"
Case 2: GetDigit = "Two"
Case 3: GetDigit = "Three"
Case 4: GetDigit = "Four"
Case 5: GetDigit = "Five"
Case 6: GetDigit = "Six"
Case 7: GetDigit = "Seven"
Case 8: GetDigit = "Eight"
Case 9: GetDigit = "Nine"
Case Else: GetDigit = ""
End Select
End Function
 
J

Jim Rech

ActiveWorkbook.Close savechanges:=Flase

May be the problem. There is more than one of these.
 
D

deen

Hi JIM,

sorry for late reply

Thx for reply, as per your instruction i have change the as true in
both area,

but till problem continue.

kidly guide me.
 
J

Jim Rech

Sorry but that is a huge amount of code and I cannot work through it. If
you open that module in the VBE and do a Debug, Compile you should be taken
to the first problem line of code by the debugger.

--
Jim
| Hi JIM,
|
| sorry for late reply
|
| Thx for reply, as per your instruction i have change the as true in
| both area,
|
| but till problem continue.
|
| kidly guide me.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| > >>ActiveWorkbook.Close savechanges:=Flase
| >
| > May be the problem. There is more than one of these.
| >
| > --
| >
| >
| >
| > > Hi,
| >
| > > I was use the code below mention in macro, in office2002 its working
| > > fine, i have to run office2000 it was show error like : compile error
| > > in hidden module: sheet1
| >
| > > kindly advice me what shall i want to do.
| >
| > > Sheet1 Code:
| > > Private Sub Worksheet_Calculate()
| > > Range("X12").EntireRow.Hidden = (Range("X12").Value = 0)
| > > Range("X13").EntireRow.Hidden = (Range("X13").Value = 0)
| > > End Sub
| >
| > > Private Sub CommandButton5_Click()
| > > Dim cell As Range
| > > Range("D9:D13").ClearContents
| > > MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
| > > End Sub
| >
| > > Private Sub CommandButton6_Click()
| > > ActiveWorkbook.Save
| > > MsgBox "SAVED SUCESSFULLY"
| > > End Sub
| > > Private Sub CommandButton7_Click()
| > > On Error Resume Next
| > > Range("C7:E21,E6,F6,F12,F13").PrintPreview
| > > On Error GoTo 0
| > > End Sub
| >
| > > Private Sub CommandButton8_Click()
| > > Application.Quit
| > > MsgBox "CLOSED SUCESSFULLY"
| > > ActiveWorkbook.Close savechanges:=Flase
| > > End Sub
| >
| > > Private Sub CommandButton2_Click()
| > > Dim cell As Range
| > > Range("D9:D13").ClearContents
| > > MsgBox "PREVIOUS DATA HAS BEEN CLEAR"
| > > End Sub
| > > Private Sub Calendar1_Click()
| > > ACTIVECELL.Value = CDbl(Calendar1.Value)
| > > ACTIVECELL.NumberFormat = "DD/MM/yyyy"
| > > ACTIVECELL.Select
| >
| > > End Sub
| >
| > > Private Sub Worksheet_SelectionChange(ByVal Target As Range)
| > > If Target.Cells.Count > 1 Then Exit Sub
| > > If Not Application.Intersect(Range("F6,D9,D10"), Target) Is
| > > Nothing Then
| > > Calendar1.Left = Target.Left + Target.Width - Calendar1.Width
| > > Calendar1.Top = Target.Top + Target.Height
| > > Calendar1.Visible = True
| > > ' select Today's date in the Calendar
| > > Calendar1.Value = Date
| > > ElseIf Calendar1.Visible Then Calendar1.Visible = False
| > > End If
| >
| > > If ACTIVECELL.Address = Range("C7").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C9").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C10").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C11").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C12").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C13").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D14").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C15").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C16").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C17").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(1, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C18").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C19").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C20").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("C21").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D15").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D16").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D17").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D18").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D19").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D20").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("D21").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E6").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E9").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E10").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E11").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E12").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E15").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E16").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E17").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E18").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E19").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E20").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E21").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("E27").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("X12").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("X13").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("Y8").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("Y9").Address Then
| > > pword = InputBox("Enter Password To Edit State:")
| > > If pword = "deen01" Then ACTIVECELL.Select Else
| > > ACTIVECELL.Offset(0, 0).Select
| > > End If
| > > If ACTIVECELL.Address = Range("Y10").Address Then
| > > pword = InputBox("Enter
| >
| > ...
| >
| > read more >>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 
D

deen

Hi Jim,

Can you explain with code how can i debug , coz i am new to the macro.

thx in advance,

regards,

Deen
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Masking the character in input box 1
Conversion from Number to Word!! Aki 1
Error on Code 1
Auto Enable Macro 9
Protection Password Prompt Problem 1
Runtime error 91: Object variable or With block variable not set 8
Password Cracker for Excel Worksheets/ Workbooks 9
works in 2007 but not in 2010 0

Top