You're welcome
- you should find enough info in the sample to understand how it was don it w/ the DBRW
But IMHO
A project of the nature you have is not suited for using the DBRW
- the DBRW uses over 300 lines of code to do what could be hand coded in ASP in less than 50 lines
- you will never be able to handle any reservations w/ the DBRW and your search results will always be too broad
- your DB structure will eventually become unmaintainable
Start learning Classic ASP (and drop the DBRW) at say
http://www.w3schools.com/asp/default.asp
--
_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (-;
To find the best Newsgroup for FrontPage support see:
http://www.frontpagemvps.com/FrontPageNewsGroups/tabid/53/Default.aspx
_____________________________________________
| Stefan, absolutely brilliant, cant thank you enough. Kind regards
| Mick
|
| "Stefan B Rusynko" wrote:
|
| > I did not send you any emails
| > The attachment is in my newsgroup post above of 6/10
| > - the web bases interface strips all attachments
| >
| > Open this newsgroup in Outlook Express by clicking the below link
| > news://msnews.microsoft.com/microsoft.public.frontpage.client
| >
| >
| > --
| >
| > _____________________________________________
| > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
| > "Warning - Using the F1 Key will not break anything!" (-;
| > To find the best Newsgroup for FrontPage support see:
| >
http://www.frontpagemvps.com/FrontPageNewsGroups/tabid/53/Default.aspx
| > _____________________________________________
| >
| >
| > | Hi Stefan, sorry I did not get any email to my address (e-mail address removed), thats
| > | where its going wrong, that is renowned for dumping emails with attachments.
| > | If you would please try again, the same name but to (e-mail address removed)
| > | perhaps that will let the Zip file through
| > | Thanks again for your help and patience.
| > | kind regards
| > | Mick
| > |
| > | "Stefan B Rusynko" wrote:
| > |
| > | > If using Outlook Express double click the paper clip to save the zip file attachment
| > | > - the unzip it to see the page
| > | >
| > | > --
| > | >
| > | > _____________________________________________
| > | > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
| > | > "Warning - Using the F1 Key will not break anything!" (-;
| > | > To find the best Newsgroup for FrontPage support see:
| > | >
http://www.frontpagemvps.com/FrontPageNewsGroups/tabid/53/Default.aspx
| > | > _____________________________________________
| > | >
| > | >
| > | > | Stefan, thanks it makes sense, thankyou. I cant see the new file you helped
| > | > | and changed for me, am I being daft again.
| > | > | kind regards
| > | > | Mick
| > | > |
| > | > | "Stefan B Rusynko" wrote:
| > | > |
| > | > | > Bad Example page
| > | > | >
| > | > | > Rethink your DB structure
| > | > | > First of all
| > | > | > "Type" is a reserved name in Access
| > | > | > - rename your DB field from Type to UnitType
| > | > | >
| > | > | > Next you have a field named SurRef which includes what appears to be a unique property ID
| > | > | > - as in 1252
| > | > | > And then you have at least 2 other fields (hyperlink fields) which have will require you to maintain duplicate data
using
| > the
| > | > same
| > | > | > property ID as part of the field data
| > | > | > Photo1 with
http://www.surproperties.com/asp/property-details_clear_blue_web.asp?pid=1252
| > | > | > photopickup with
http://www.surproperties.com/property_images/1252a.jpg
| > | > | >
| > | > | > In both cases those fields should pick up the pid and image name from the SurRef field
| > | > | > - but unless you learn to hand code your ASP you are limited to the constraints of the DRW which means redundant data
in
| > data
| > | > | > fields (a potential for errors in the future)
| > | > | >
| > | > | > Any way
| > | > | > I did look at your code and w/i the "constraints" of the DBRW (plus some hand coded ASP to do it all in 1 page), I
corrected
| > it
| > | > to
| > | > | > hand the case when not all form fields are selected
| > | > | > - the example uses the field name UnitType not Type
| > | > | >
| > | > | > Unzip and Try the attached page in your web (File import it into top level folder - same as the fpdb and _fpclass
folders)
| > | > | >
| > | > | > PS
| > | > | >
| > | > | > IMHO
| > | > | > Your form price (Euros) range selections were way too numerous and random for any user to sort thru
| > | > | > - so I replaced it w/ a simple script for 25-550K, in increments of 25K
| > | > | >
| > | > | > --
| > | > | >
| > | > | > _____________________________________________
| > | > | > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
| > | > | > "Warning - Using the F1 Key will not break anything!" (-;
| > | > | > To find the best Newsgroup for FrontPage support see:
| > | > | >
http://www.frontpagemvps.com/FrontPageNewsGroups/tabid/53/Default.aspx
| > | > | > _____________________________________________
| > | > | >
| > | > | >
| > | > | > | Hi Stefan, My problem is probably worse than I thought, anyway here we go.
| > | > | > | I just put into the following query some random values (not selected from
| > | > | > | the drop downs on selectaproperty2.asp but direct input into the address bar
| > | > | > | of quickresults.asp) just as an example.
| > | > | > |
| > | > | > |
| > | > | >
| > | >
| >
http://new.surproperties.com/_datab...caleta&type=apartment&bed=2&priceeuros=300000
| > | > | > | and got a few expected results. So I think that bit is working ok.
| > | > | > |
| > | > | > | I have as asked uploaded the quickresults.txt file, you can find it at
| > | > | > |
http://new.surproperties.com/_database1_interface/clients/editor/quickresults.txt
| > | > | > |
| > | > | > | Thanks also for your comments on presentation, as soon as I can get it all
| > | > | > | working, its my next job.
| > | > | > | Many thanks for your help and patience
| > | > | > | kind regards
| > | > | > | Mick
| > | > | > |
| > | > | > |
| > | > | > |
| > | > | > | "Stefan B Rusynko" wrote:
| > | > | > |
| > | > | > | > I get no Results for anything I try (even selecting values)
| > | > | > | >
| > | > | > | > Impossible to see any server side scripts in the browser
| > | > | > | > (they are already processed server side)
| > | > | > | > Make a copy of your results page and rename it to quickresults.txt so the asp code is visible to look at
| > | > | > | >
| > | > | > | > The form look generally OK
| > | > | > | > - but not too user friendly
| > | > | > | > (make the selection explanations clearer)
| > | > | > | >
| > | > | > | > As for sending form results from dropdowns to a DBRW page see
| > | > | > | >
http://spiderwebwoman.com/tutorials/doubledropdown.htm
| > | > | > | >
| > | > | > | > PS
| > | > | > | > Change the color of your results row so it is visible
| > | > | > | > - the blue on blue is not
| > | > | > | >
| > | > | > | > --
| > | > | > | >
| > | > | > | > _____________________________________________
| > | > | > | > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
| > | > | > | > "Warning - Using the F1 Key will not break anything!" (-;
| > | > | > | > To find the best Newsgroup for FrontPage support see:
| > | > | > | >
http://www.frontpagemvps.com/FrontPageNewsGroups/tabid/53/Default.aspx
| > | > | > | > _____________________________________________
| > | > | > | >
| > | > | > | >
| > | > | > | > | Hi Stefan, many thanks, but Im not quite there yet. I selected "%" for the
| > | > | > | > | two fields "Type" and "Location" as the default value, however unless I
| > | > | > | > | actually select a value from the drop down lists for each of these fields, no
| > | > | > | > | results. Its probably me being daft here, could you kindly take a look at the
| > | > | > | > | draft page I have set up for this exercise, link below, and give me a further
| > | > | > | > | clue.
| > | > | > | > |
| > | > | > | > |
http://new.surproperties.com/_database1_interface/clients/editor/selectaproperty2.asp and the form posts to
| > | > | > | > |
http://new.surproperties.com/_database1_interface/clients/editor/quickresults.asp
| > | > | > | > |
| > | > | > | > | Kind regards
| > | > | > | > | Mick
| > | > | > | > |
| > | > | > | > | "Stefan B Rusynko" wrote:
| > | > | > | > |
| > | > | > | > | > You are using ANDs
| > | > | > | > | > - so both (or in your case all 4) conditions must be True (yield a matching result) for the query to yield
anything
| > | > | > | > | > - so you need default values that will always be True if the user does not pass any
| > | > | > | > | >
| > | > | > | > | > Since you have 4 conditions for user to select, presumably they are from 4 form fields
| > | > | > | > | > In the top of the form processing page set a default values for each query field if the field is empty
| > | > | > | > | > <%
| > | > | > | > | > If Not IsNum(Request.Form("Bed")) Then Bed=1
| > | > | > | > | > If Not IsNum(Request.Form("PriceEuros")) Then PriceEuros=999999
| > | > | > | > | > If Not Len(Request.Form("Location"))>0 Then Location="%"
| > | > | > | > | > If Not Len(Request.Form("Type"))>0 Then Type="%"
| > | > | > | > | > %>
| > | > | > | > | >
| > | > | > | > | > Or in your form set a default value which is passed if the user does not select one
| > | > | > | > | > Best done w/ dropdowns (w/ the default value as selected)
| > | > | > | > | > - for beds use: 1
| > | > | > | > | > - for price use say: 999999
| > | > | > | > | > - for Location and Type use: %
| > | > | > | > | >
| > | > | > | > | >
| > | > | > | > | > --
| > | > | > | > | >
| > | > | > | > | > _____________________________________________
| > | > | > | > | > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
| > | > | > | > | > "Warning - Using the F1 Key will not break anything!" (-;
| > | > | > | > | > To find the best Newsgroup for FrontPage support see:
| > | > | > | > | >
http://www.frontpagemvps.com/FrontPageNewsGroups/tabid/53/Default.aspx
| > | > | > | > | > _____________________________________________
| > | > | > | > | >
| > | > | > | > | >
| > | > | > | > | > |I am trying to filter some database results, with partial success, but need a
| > | > | > | > | > | little help please. If a client enters values for the four "values" i.e.
| > | > | > | > | > |
| > | > | > | > | > | WHERE bed=2&price=200000&location=Spain&Type=apartment good news up come the
| > | > | > | > | > | correct results.
| > | > | > | > | > |
| > | > | > | > | > | What I would like to do is, if the "type" field is left as a default value
| > | > | > | > | > | say "any" the results display all "type" values, i.e. apartments, houses,
| > | > | > | > | > | studios etc, and with the other filed values being met. Or if the Location
| > | > | > | > | > | field is left default value say "any" the results display all locations i.e.
| > | > | > | > | > | spain,france, again with the other field values being met. Taking this to the
| > | > | > | > | > | last possible combination. If I select "beds" as value 2, and priceeuros as
| > | > | > | > | > | maximum 200000, the results display all "types" and all "locations, but with
| > | > | > | > | > | a "bed" value=2 and a "priceeuro">200000 being met.
| > | > | > | > | > |
| > | > | > | > | > | I have looked at prevoius posts and the first question asked by the MVP is
| > | > | > | > | > | show us your query so I have copied it below. Its a little beyond me this one.
| > | > | > | > | > |
| > | > | > | > | > | Thanks for your help again.
| > | > | > | > | > |
| > | > | > | > | > | Mick
| > | > | > | > | > |
| > | > | > | > | > | <%
| > | > | > | > | > | fp_sQry="SELECT * FROM property_current WHERE (Bed >= ::Bed:: AND
| > | > | > | > | > | PriceEuros <= :
riceEuros:: AND Location = '::Location::' AND Type =
| > | > | > | > | > | '::Type::') ORDER BY PriceEuros ASC"
| > | > | > | > | > | fp_sDefault="Bed=Bedrooms&PriceEuros=&Location=&Type="
| > | > | > | > | > | fp_sNoRecords="<tr><td colspan=9 align=""LEFT"" width=""100%"">Sorry - No
| > | > | > | > | > | Properties match - Please re-select</td></tr>"
| > | > | > | > | > | fp_sDataConn="Database1"
| > | > | > | > | > | fp_iMaxRecords=0
| > | > | > | > | > | fp_iCommandType=1
| > | > | > | > | > | fp_iPageSize=0
| > | > | > | > | > | fp_fTableFormat=True
| > | > | > | > | > | fp_fMenuFormat=False
| > | > | > | > | > | fp_sMenuChoice="SurRef"
| > | > | > | > | > | fp_sMenuValue="SurRef"
| > | > | > | > | > |
| > | > | > | > | >
| > | > | > | >
| > | > | >
| > | >
| >
fp_sColTypes="&Expr1000=3&Datebookedon=135&SurRef=202&Complex=202&Type=202&Location=202&Bed=2&Bath=3&Furnished=202&Description=203&PriceEuros=3&PricePounds=3&Photo1=203&Photo=203&photopickup=203&IncludeSur=11&IncludeClear=11&ID=3&"
| > | > | > | > | > | fp_iDisplayCols=9
| > | > | > | > | > | fp_fCustomQuery=False
| > | > | > | > | > | BOTID=0
| > | > | > | > | > | fp_iRegion=BOTID
| > | > | > | > | > | %>
| > | > | > | > | > |
| > | > | > | > | >
| > | > | > | > | >
| > | > | > | > | >
| > | > | > | >
| > | > | > | >
| > | > | > | >
| > | > | >
| > | > | >
| > | > | >
| > | >
| > | >
| > | >
| >
| >
| >