Help Installing BCM 2007

J

JPtrump

I was able to install nearly the entire Office 2007 Professional Suite on my
Vista pc, but my system will not install BCM. SQL Express installed
properly.

I have searched through the forums, but I haven't found a solution. I have
checked the error log and it states that I have a 1935 error code.

When I checked that on the Knowledge Base it says that I need to repair
..Net, which I did; install 2.0, which is installed; or reinstall 1.1.
Nothing seems to be working.

Any suggestion?

By the way, an abbreviated version of the log is below:

MSI (s) (D8:9C) [23:55:01:448]: Assembly Error:The referenced assembly is
not installed on your system.

MSI (s) (D8:9C) [23:55:01:448]: Note: 1: 1935 2:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E} 3: 0x800736B3 4: IAssemblyCacheItem 5:
Commit 6:
Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error (sxs): To get more diagnostic
information, enable the Component Based Servicing Log.
MSI (s) (D8:9C) [23:55:01:449]: Product: Business Contact Manager for
Outlook 2007 -- Error 1935.An error occurred during the installation of
assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}

Error 1935.An error occurred during the installation of assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}
MSI (s) (D8:9C) [23:55:01:477]: User policy value 'DisableRollback' is 0
MSI (s) (D8:9C) [23:55:01:477]: Machine policy value 'DisableRollback' is 0
Action ended 23:55:01: InstallFinalize. Return value 3.
 
L

Luther

I was able to install nearly the entire Office 2007 Professional Suite onmy
Vista pc, but my system will not install BCM. SQL Express installed
properly.

I have searched through the forums, but I haven't found a solution. I have
checked the error log and it states that I have a 1935 error code.

When I checked that on the Knowledge Base it says that I need to repair
.Net, which I did; install 2.0, which is installed; or reinstall 1.1.
Nothing seems to be working.

Any suggestion?

By the way, an abbreviated version of the log is below:

MSI (s) (D8:9C) [23:55:01:448]: Assembly Error:The referenced assembly is
not installed on your system.

MSI (s) (D8:9C) [23:55:01:448]: Note: 1: 1935 2:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E} 3: 0x800736B3 4: IAssemblyCacheItem 5:
Commit 6:
Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken=­"1fc8b3b9a1e18e3b",processorArchitecture="x86"
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error (sxs): To get more diagnostic
information, enable the Component Based Servicing Log.
MSI (s) (D8:9C) [23:55:01:449]: Product: Business Contact Manager for
Outlook 2007 -- Error 1935.An error occurred during the installation of
assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}

Error 1935.An error occurred during the installation of assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}
MSI (s) (D8:9C) [23:55:01:477]: User policy value 'DisableRollback' is 0
MSI (s) (D8:9C) [23:55:01:477]: Machine policy value 'DisableRollback' is0
Action ended 23:55:01: InstallFinalize. Return value 3.

Try removing .NET 2 and then installing BCM, which will reinstall .NET
2. There were some problems in the past with hotfixes that needed to
be applied to .NET 2 and I believe that was the solution.
 
J

JPtrump

I uninstalled the compact framework, which is the only .Net item listed in
add/remove programs. When I try to install the .Net framework from the BCM
disc (it didn't attempt an install automatically), I get the error message
that .Net is part of the operating system.

Luther said:
I was able to install nearly the entire Office 2007 Professional Suite on my
Vista pc, but my system will not install BCM. SQL Express installed
properly.

I have searched through the forums, but I haven't found a solution. I have
checked the error log and it states that I have a 1935 error code.

When I checked that on the Knowledge Base it says that I need to repair
.Net, which I did; install 2.0, which is installed; or reinstall 1.1.
Nothing seems to be working.

Any suggestion?

By the way, an abbreviated version of the log is below:

MSI (s) (D8:9C) [23:55:01:448]: Assembly Error:The referenced assembly is
not installed on your system.

MSI (s) (D8:9C) [23:55:01:448]: Note: 1: 1935 2:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E} 3: 0x800736B3 4: IAssemblyCacheItem 5:
Commit 6:
Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken=­"1fc8b3b9a1e18e3b",processorArchitecture="x86"
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error (sxs): To get more diagnostic
information, enable the Component Based Servicing Log.
MSI (s) (D8:9C) [23:55:01:449]: Product: Business Contact Manager for
Outlook 2007 -- Error 1935.An error occurred during the installation of
assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}

Error 1935.An error occurred during the installation of assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}
MSI (s) (D8:9C) [23:55:01:477]: User policy value 'DisableRollback' is 0
MSI (s) (D8:9C) [23:55:01:477]: Machine policy value 'DisableRollback' is 0
Action ended 23:55:01: InstallFinalize. Return value 3.

Try removing .NET 2 and then installing BCM, which will reinstall .NET
2. There were some problems in the past with hotfixes that needed to
be applied to .NET 2 and I believe that was the solution.
 
L

logosegos

JPtrump said:
I uninstalled the compact framework, which is the only .Net item listed in
add/remove programs. When I try to install the .Net framework from the BCM
disc (it didn't attempt an install automatically), I get the error message
that .Net is part of the operating system.

Luther said:
I was able to install nearly the entire Office 2007 Professional Suite on my
Vista pc, but my system will not install BCM. SQL Express installed
properly.

I have searched through the forums, but I haven't found a solution. I have
checked the error log and it states that I have a 1935 error code.

When I checked that on the Knowledge Base it says that I need to repair
.Net, which I did; install 2.0, which is installed; or reinstall 1.1.
Nothing seems to be working.

Any suggestion?

By the way, an abbreviated version of the log is below:

MSI (s) (D8:9C) [23:55:01:448]: Assembly Error:The referenced assembly is
not installed on your system.

MSI (s) (D8:9C) [23:55:01:448]: Note: 1: 1935 2:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E} 3: 0x800736B3 4: IAssemblyCacheItem 5:
Commit 6:
Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken=­"1fc8b3b9a1e18e3b",processorArchitecture="x86"
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error (sxs): To get more diagnostic
information, enable the Component Based Servicing Log.
MSI (s) (D8:9C) [23:55:01:449]: Product: Business Contact Manager for
Outlook 2007 -- Error 1935.An error occurred during the installation of
assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}

Error 1935.An error occurred during the installation of assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}
MSI (s) (D8:9C) [23:55:01:477]: User policy value 'DisableRollback' is 0
MSI (s) (D8:9C) [23:55:01:477]: Machine policy value 'DisableRollback' is 0
Action ended 23:55:01: InstallFinalize. Return value 3.

Try removing .NET 2 and then installing BCM, which will reinstall .NET
2. There were some problems in the past with hotfixes that needed to
be applied to .NET 2 and I believe that was the solution.
 
L

logosegos

Try unintalling SQL server and intall from disk 2, let MS Office install SQL
with BCM
worked for me

JPtrump said:
I uninstalled the compact framework, which is the only .Net item listed in
add/remove programs. When I try to install the .Net framework from the BCM
disc (it didn't attempt an install automatically), I get the error message
that .Net is part of the operating system.

Luther said:
I was able to install nearly the entire Office 2007 Professional Suite on my
Vista pc, but my system will not install BCM. SQL Express installed
properly.

I have searched through the forums, but I haven't found a solution. I have
checked the error log and it states that I have a 1935 error code.

When I checked that on the Knowledge Base it says that I need to repair
.Net, which I did; install 2.0, which is installed; or reinstall 1.1.
Nothing seems to be working.

Any suggestion?

By the way, an abbreviated version of the log is below:

MSI (s) (D8:9C) [23:55:01:448]: Assembly Error:The referenced assembly is
not installed on your system.

MSI (s) (D8:9C) [23:55:01:448]: Note: 1: 1935 2:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E} 3: 0x800736B3 4: IAssemblyCacheItem 5:
Commit 6:
Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken=­"1fc8b3b9a1e18e3b",processorArchitecture="x86"
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error (sxs): To get more diagnostic
information, enable the Component Based Servicing Log.
MSI (s) (D8:9C) [23:55:01:449]: Product: Business Contact Manager for
Outlook 2007 -- Error 1935.An error occurred during the installation of
assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}

Error 1935.An error occurred during the installation of assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}
MSI (s) (D8:9C) [23:55:01:477]: User policy value 'DisableRollback' is 0
MSI (s) (D8:9C) [23:55:01:477]: Machine policy value 'DisableRollback' is 0
Action ended 23:55:01: InstallFinalize. Return value 3.

Try removing .NET 2 and then installing BCM, which will reinstall .NET
2. There were some problems in the past with hotfixes that needed to
be applied to .NET 2 and I believe that was the solution.
 
L

Luther

I was able to install nearly the entire Office 2007 Professional Suite on my
Vista pc, but my system will not install BCM. SQL Express installed
properly.
I have searched through the forums, but I haven't found a solution. I have
checked the error log and it states that I have a 1935 error code.
When I checked that on the Knowledge Base it says that I need to repair
.Net, which I did; install 2.0, which is installed; or reinstall 1.1.
Nothing seems to be working.
Any suggestion?
By the way, an abbreviated version of the log is below:
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error:The referenced assembly is
not installed on your system.
MSI (s) (D8:9C) [23:55:01:448]: Note: 1: 1935 2:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E} 3: 0x800736B3 4: IAssemblyCacheItem 5:
Commit 6:
Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken=­­"1fc8b3b9a1e18e3b",processorArchitecture="x86"
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error (sxs): To get more diagnostic
information, enable the Component Based Servicing Log.
MSI (s) (D8:9C) [23:55:01:449]: Product: Business Contact Manager for
Outlook 2007 -- Error 1935.An error occurred during the installation of
assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}
Error 1935.An error occurred during the installation of assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}
MSI (s) (D8:9C) [23:55:01:477]: User policy value 'DisableRollback' is 0
MSI (s) (D8:9C) [23:55:01:477]: Machine policy value 'DisableRollback' is 0
Action ended 23:55:01: InstallFinalize. Return value 3.

Try removing .NET 2 and then installing BCM, which will reinstall .NET
2. There were some problems in the past with hotfixes that needed to
be applied to .NET 2 and I believe that was the solution.- Hide quoted text -

- Show quoted text -

I missed that you were doing this on Vista. There .NET is a part of
the OS.

In this log message:
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error:The referenced assembly
is
not installed on your system.

Can you tell from the surrounding messages, what assembly it is
referring to?
 
J

JPtrump

From reading the log file, the only assembly I see referenced is
Microsoft.VC80.DebugMFC. Is there something else I should look for in the
log file (a word or phrase perhaps)?

Luther said:
I was able to install nearly the entire Office 2007 Professional Suite on my
Vista pc, but my system will not install BCM. SQL Express installed
properly.
I have searched through the forums, but I haven't found a solution. I have
checked the error log and it states that I have a 1935 error code.
When I checked that on the Knowledge Base it says that I need to repair
.Net, which I did; install 2.0, which is installed; or reinstall 1.1.
Nothing seems to be working.
Any suggestion?
By the way, an abbreviated version of the log is below:
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error:The referenced assembly is
not installed on your system.
MSI (s) (D8:9C) [23:55:01:448]: Note: 1: 1935 2:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E} 3: 0x800736B3 4: IAssemblyCacheItem 5:
Commit 6:
Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken=­­"1fc8b3b9a1e18e3b",processorArchitecture="x86"
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error (sxs): To get more diagnostic
information, enable the Component Based Servicing Log.
MSI (s) (D8:9C) [23:55:01:449]: Product: Business Contact Manager for
Outlook 2007 -- Error 1935.An error occurred during the installation of
assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}
Error 1935.An error occurred during the installation of assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}
MSI (s) (D8:9C) [23:55:01:477]: User policy value 'DisableRollback' is 0
MSI (s) (D8:9C) [23:55:01:477]: Machine policy value 'DisableRollback' is 0
Action ended 23:55:01: InstallFinalize. Return value 3.

Try removing .NET 2 and then installing BCM, which will reinstall .NET
2. There were some problems in the past with hotfixes that needed to
be applied to .NET 2 and I believe that was the solution.- Hide quoted text -

- Show quoted text -

I missed that you were doing this on Vista. There .NET is a part of
the OS.

In this log message:
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error:The referenced assembly
is
not installed on your system.

Can you tell from the surrounding messages, what assembly it is
referring to?
 
L

Luther

From reading the log file, the only assembly I see referenced is
Microsoft.VC80.DebugMFC. Is there something else I should look for in the
log file (a word or phrase perhaps)?



Luther said:
On May 18, 12:36 am, JPtrump <[email protected]>
wrote:
I was able to install nearly the entire Office 2007 Professional Suite on my
Vista pc, but my system will not install BCM. SQL Express installed
properly.
I have searched through the forums, but I haven't found a solution.I have
checked the error log and it states that I have a 1935 error code.
When I checked that on the Knowledge Base it says that I need to repair
.Net, which I did; install 2.0, which is installed; or reinstall 1.1.
Nothing seems to be working.
Any suggestion?
By the way, an abbreviated version of the log is below:
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error:The referenced assembly is
not installed on your system.
MSI (s) (D8:9C) [23:55:01:448]: Note: 1: 1935 2:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E} 3: 0x800736B3 4: IAssemblyCacheItem 5:
Commit 6:
Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken=­­­"1fc8b3b9a1e18e3b",processorArchitecture="x86"
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error (sxs): To get more diagnostic
information, enable the Component Based Servicing Log.
MSI (s) (D8:9C) [23:55:01:449]: Product: Business Contact Manager for
Outlook 2007 -- Error 1935.An error occurred during the installation of
assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­­­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}
Error 1935.An error occurred during the installation of assembly
'Microsoft.VC80.DebugMFC,type="win32",version="8.0.50727.42",publicKeyToken­­­="1fc8b3b9a1e18e3b",processorArchitecture="x86"'.
Please refer to Help and Support for more information. HRESULT: 0x800736B3.
assembly interface: IAssemblyCacheItem, function: Commit, component:
{51DF8B23-0124-F455-A01F-C8B3B9A1E18E}
MSI (s) (D8:9C) [23:55:01:477]: User policy value 'DisableRollback'is 0
MSI (s) (D8:9C) [23:55:01:477]: Machine policy value 'DisableRollback' is 0
Action ended 23:55:01: InstallFinalize. Return value 3.
Try removing .NET 2 and then installing BCM, which will reinstall .NET
2. There were some problems in the past with hotfixes that needed to
be applied to .NET 2 and I believe that was the solution.- Hide quoted text -
- Show quoted text -
I missed that you were doing this on Vista. There .NET is a part of
the OS.
In this log message:
MSI (s) (D8:9C) [23:55:01:448]: Assembly Error:The referenced assembly
is
not installed on your system.
Can you tell from the surrounding messages, what assembly it is
referring to?- Hide quoted text -

- Show quoted text -

I don't really have anything helpful to add. I don't think the release
version of BCM should be installing any debug DLLs, so finding that
file referenced in a log file is strange.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top