Help with email submit button

[Noel]

Hi all! I'm very new to Frontpage, created my first website last week. I'm
trying to add a contact page with a form submit button that emails me the
info. When I open the form it says:

"[FrontPage Save Results Component]"

across the top for some reason. When I fill it out & hit submit I get an
error screen that says:

"FrontPage Run-Time Component Page
You have submitted a form or followed a link to a page that requires a web
server and the FrontPage Server Extensions to function properly.

This form or other FrontPage component will work correctly if you publish
this web to a web server that has the FrontPage Server Extensions installed.

Click the <Back> arrow to return to the previous page."

I've checked my webserver & it says that the FP server extensions are
installed, and everything else works fine. Any ideas? Here is a link:

http://www.exposuresbynoel.com/Info/Contact.htm

 

[Thomas A. Rowe]

Did you publish the site to a server that has the FP extension via FP's http mode? If yes, then you
need to contact your web host to have them configure the extensions to process email.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
==============================================
If you feel your current issue is a results of installing
a Service Pack or security update, please contact
Microsoft Product Support Services:
http://support.microsoft.com
If the problem can be shown to have been caused by a
security update, then there is usually no charge for the call.
==============================================

 

[Ronx]

The error message text comes from nortbots.htm, and indicates that the
form was FTPed to the server, or the form is being tested on a disc
based web.
The form must be http:// published to a server running the FrontPage
extensions, using a destination similar to http://example.com, or
http://www.example.com .

If you have used FTP, the FrontPage extensions may need to be checked
or re-installed; FTP often corrupts the extensions.

 

[Noel]

I used the "publish web" button in FP to send the files to the web server.
The server says that the FP extensions are installed. Should I remove them &
re-install? Thanks for the replies!

The error message text comes from nortbots.htm, and indicates that the
form was FTPed to the server, or the form is being tested on a disc
based web.
The form must be http:// published to a server running the FrontPage
extensions, using a destination similar to http://example.com, or
http://www.example.com .

If you have used FTP, the FrontPage extensions may need to be checked
or re-installed; FTP often corrupts the extensions.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/

Hi all! I'm very new to Frontpage, created my first website last
week. I'm
trying to add a contact page with a form submit button that emails
me the
info. When I open the form it says:

"[FrontPage Save Results Component]"

across the top for some reason. When I fill it out & hit submit I
get an
error screen that says:

"FrontPage Run-Time Component Page
You have submitted a form or followed a link to a page that requires
a web
server and the FrontPage Server Extensions to function properly.

This form or other FrontPage component will work correctly if you
publish
this web to a web server that has the FrontPage Server Extensions
installed.

Click the <Back> arrow to return to the previous page."

I've checked my webserver & it says that the FP server extensions
are
installed, and everything else works fine. Any ideas? Here is a
link:

http://www.exposuresbynoel.com/Info/Contact.htm

 

[Andrew Murray]

OK, but make sure you're not FTP'ing the files through Frontpage - use the
HTTP mode; you can do both in FP. Use only HTTP mode for servers that have
the FPSE enabled.

Perhaps reinstalling the extensions will help....

I used the "publish web" button in FP to send the files to the web server.
The server says that the FP extensions are installed. Should I remove
them &
re-install? Thanks for the replies!

The error message text comes from nortbots.htm, and indicates that the
form was FTPed to the server, or the form is being tested on a disc
based web.
The form must be http:// published to a server running the FrontPage
extensions, using a destination similar to http://example.com, or
http://www.example.com .

If you have used FTP, the FrontPage extensions may need to be checked
or re-installed; FTP often corrupts the extensions.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/

Hi all! I'm very new to Frontpage, created my first website last
week. I'm
trying to add a contact page with a form submit button that emails
me the
info. When I open the form it says:

"[FrontPage Save Results Component]"

across the top for some reason. When I fill it out & hit submit I
get an
error screen that says:

"FrontPage Run-Time Component Page
You have submitted a form or followed a link to a page that requires
a web
server and the FrontPage Server Extensions to function properly.

This form or other FrontPage component will work correctly if you
publish
this web to a web server that has the FrontPage Server Extensions
installed.

Click the <Back> arrow to return to the previous page."

I've checked my webserver & it says that the FP server extensions
are
installed, and everything else works fine. Any ideas? Here is a
link:

http://www.exposuresbynoel.com/Info/Contact.htm

 

[Noel]

Well, reinstalling the extensions made the form work. But I'm not sure how
to change my Publish Web function to use HTTP mode. The only place I found
to do it is in the dialog box by changing it from ftp://exposuresbynoel.com
to http://exposuresbynoel.com, but then it won't accept my password to
connect. Hmmm....

OK, but make sure you're not FTP'ing the files through Frontpage - use the
HTTP mode; you can do both in FP. Use only HTTP mode for servers that have
the FPSE enabled.

Perhaps reinstalling the extensions will help....

I used the "publish web" button in FP to send the files to the web server.
The server says that the FP extensions are installed. Should I remove
them &
re-install? Thanks for the replies!

The error message text comes from nortbots.htm, and indicates that the
form was FTPed to the server, or the form is being tested on a disc
based web.
The form must be http:// published to a server running the FrontPage
extensions, using a destination similar to http://example.com, or
http://www.example.com .

If you have used FTP, the FrontPage extensions may need to be checked
or re-installed; FTP often corrupts the extensions.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/

Hi all! I'm very new to Frontpage, created my first website last
week. I'm
trying to add a contact page with a form submit button that emails
me the
info. When I open the form it says:

"[FrontPage Save Results Component]"

across the top for some reason. When I fill it out & hit submit I
get an
error screen that says:

"FrontPage Run-Time Component Page
You have submitted a form or followed a link to a page that requires
a web
server and the FrontPage Server Extensions to function properly.

This form or other FrontPage component will work correctly if you
publish
this web to a web server that has the FrontPage Server Extensions
installed.

Click the <Back> arrow to return to the previous page."

I've checked my webserver & it says that the FP server extensions
are
installed, and everything else works fine. Any ideas? Here is a
link:

http://www.exposuresbynoel.com/Info/Contact.htm

 

[Thomas A. Rowe]

You need to contact your web host to make sure you have access to your account via FP http mode and
have the correct login info.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
==============================================
If you feel your current issue is a results of installing
a Service Pack or security update, please contact
Microsoft Product Support Services:
http://support.microsoft.com
If the problem can be shown to have been caused by a
security update, then there is usually no charge for the call.
==============================================

Well, reinstalling the extensions made the form work. But I'm not sure how
to change my Publish Web function to use HTTP mode. The only place I found
to do it is in the dialog box by changing it from ftp://exposuresbynoel.com
to http://exposuresbynoel.com, but then it won't accept my password to
connect. Hmmm....

OK, but make sure you're not FTP'ing the files through Frontpage - use the
HTTP mode; you can do both in FP. Use only HTTP mode for servers that have
the FPSE enabled.

Perhaps reinstalling the extensions will help....

I used the "publish web" button in FP to send the files to the web server.
The server says that the FP extensions are installed. Should I remove
them &
re-install? Thanks for the replies!

:

The error message text comes from nortbots.htm, and indicates that the
form was FTPed to the server, or the form is being tested on a disc
based web.
The form must be http:// published to a server running the FrontPage
extensions, using a destination similar to http://example.com, or
http://www.example.com .

If you have used FTP, the FrontPage extensions may need to be checked
or re-installed; FTP often corrupts the extensions.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/

Hi all! I'm very new to Frontpage, created my first website last
week. I'm
trying to add a contact page with a form submit button that emails
me the
info. When I open the form it says:

"[FrontPage Save Results Component]"

across the top for some reason. When I fill it out & hit submit I
get an
error screen that says:

"FrontPage Run-Time Component Page
You have submitted a form or followed a link to a page that requires
a web
server and the FrontPage Server Extensions to function properly.

This form or other FrontPage component will work correctly if you
publish
this web to a web server that has the FrontPage Server Extensions
installed.

Click the <Back> arrow to return to the previous page."

I've checked my webserver & it says that the FP server extensions
are
installed, and everything else works fine. Any ideas? Here is a
link:

http://www.exposuresbynoel.com/Info/Contact.htm

 

[Noel]

I figured it out now. When I reinstalled the extensions I had to reset the
password, so now HTML publishing works. Thank you to everyone for all the
help!

You need to contact your web host to make sure you have access to your account via FP http mode and
have the correct login info.

--
==============================================
Thomas A. Rowe (Microsoft MVP - FrontPage)
==============================================
If you feel your current issue is a results of installing
a Service Pack or security update, please contact
Microsoft Product Support Services:
http://support.microsoft.com
If the problem can be shown to have been caused by a
security update, then there is usually no charge for the call.
==============================================

Well, reinstalling the extensions made the form work. But I'm not sure how
to change my Publish Web function to use HTTP mode. The only place I found
to do it is in the dialog box by changing it from ftp://exposuresbynoel.com
to http://exposuresbynoel.com, but then it won't accept my password to
connect. Hmmm....

OK, but make sure you're not FTP'ing the files through Frontpage - use the
HTTP mode; you can do both in FP. Use only HTTP mode for servers that have
the FPSE enabled.

Perhaps reinstalling the extensions will help....

I used the "publish web" button in FP to send the files to the web server.
The server says that the FP extensions are installed. Should I remove
them &
re-install? Thanks for the replies!

:

The error message text comes from nortbots.htm, and indicates that the
form was FTPed to the server, or the form is being tested on a disc
based web.
The form must be http:// published to a server running the FrontPage
extensions, using a destination similar to http://example.com, or
http://www.example.com .

If you have used FTP, the FrontPage extensions may need to be checked
or re-installed; FTP often corrupts the extensions.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/

Hi all! I'm very new to Frontpage, created my first website last
week. I'm
trying to add a contact page with a form submit button that emails
me the
info. When I open the form it says:

"[FrontPage Save Results Component]"

across the top for some reason. When I fill it out & hit submit I
get an
error screen that says:

"FrontPage Run-Time Component Page
You have submitted a form or followed a link to a page that requires
a web
server and the FrontPage Server Extensions to function properly.

This form or other FrontPage component will work correctly if you
publish
this web to a web server that has the FrontPage Server Extensions
installed.

Click the <Back> arrow to return to the previous page."

I've checked my webserver & it says that the FP server extensions
are
installed, and everything else works fine. Any ideas? Here is a
link:

http://www.exposuresbynoel.com/Info/Contact.htm