Numbering of equations

[Jean-Pierre]

I am using WORD2002-SP3, with W2K-SP4

I write equations using the equation editor included in WORD. I want to
number these equations automatically. There for I use the insert a "caption"
from the "Insert - Reference - Caption" menu. I place this caption at the
right edge of the line of the equation using the right tabulation. Thus the
"caption is located in the same paragraph as the equation, which is what I
want, as I want the equation number to be on the same line as the equation.

Note : I defined a "new" label as "[Ed. ". The caption is thus not a
"standard" caption.

It works fine : the equations are sequentially numbered and the number comes
on the right place, at the far-right end of the equation line.

The problem comes when I want to reference an equation somewhere in the text
: I use the menu item "Insert - Reference - Cross reference" and then choose
the correct equation in the list. Whatever I ask to insert ("Entire caption"
/ "Only label and number" / "Only caption text") the whole line gets
inserted, i.e. the complete equation, the caption label and the equation
number.

Can anyone give me a hint on how to insert only the equation number and not
the whole line (paragraph ?).

Thank you in advance.

Jean-Pierre

 

[Suzanne S. Barnhill]

Unfortunately, Word inserts the caption bookmark around the whole paragraph.
The only way to avoid this (short of getting MathType) is to put the
equation and its caption in the left and right cells of a single-row,
two-column borderless table. If you save a sample table (with dummy equation
and caption) as an AutoText entry, it is fairly trivial to insert.

 

[Jean-Pierre]

Thank you for the idea.

I try to put it to work.

Jean-Pierre
=======================

Unfortunately, Word inserts the caption bookmark around the whole paragraph.
The only way to avoid this (short of getting MathType) is to put the
equation and its caption in the left and right cells of a single-row,
two-column borderless table. If you save a sample table (with dummy equation
and caption) as an AutoText entry, it is fairly trivial to insert.

I am using WORD2002-SP3, with W2K-SP4

I write equations using the equation editor included in WORD. I want to
number these equations automatically. There for I use the insert a "caption"
from the "Insert - Reference - Caption" menu. I place this caption at the
right edge of the line of the equation using the right tabulation. Thus the
"caption is located in the same paragraph as the equation, which is what I
want, as I want the equation number to be on the same line as the equation.

Note : I defined a "new" label as "[Ed. ". The caption is thus not a
"standard" caption.

It works fine : the equations are sequentially numbered and the number comes
on the right place, at the far-right end of the equation line.

The problem comes when I want to reference an equation somewhere in the text
: I use the menu item "Insert - Reference - Cross reference" and then choose
the correct equation in the list. Whatever I ask to insert ("Entire caption"
/ "Only label and number" / "Only caption text") the whole line gets
inserted, i.e. the complete equation, the caption label and the equation
number.

Can anyone give me a hint on how to insert only the equation number and not
the whole line (paragraph ?).

Thank you in advance.

Jean-Pierre

 

[Jean-Pierre]

I tried the idea, placing a dummy equation and caption in a table (2 col, 1
line, borderless) and defining it in an autotext entry. Borders were deleted
through the menu "Format / Borders and shadings / Borders -> none " . The
whole table (including the paragraph mark) was selected before doing so

However, when I insert a new such "table", the dummy equation number
increases, which is correct, but the new table is inserted WITH borders.

Can it be avoided, or do I have to delete the borders every time ?

Jean-Pierre
=========================

Unfortunately, Word inserts the caption bookmark around the whole paragraph.
The only way to avoid this (short of getting MathType) is to put the
equation and its caption in the left and right cells of a single-row,
two-column borderless table. If you save a sample table (with dummy equation
and caption) as an AutoText entry, it is fairly trivial to insert.

I am using WORD2002-SP3, with W2K-SP4

I write equations using the equation editor included in WORD. I want to
number these equations automatically. There for I use the insert a "caption"
from the "Insert - Reference - Caption" menu. I place this caption at the
right edge of the line of the equation using the right tabulation. Thus the
"caption is located in the same paragraph as the equation, which is what I
want, as I want the equation number to be on the same line as the equation.

Note : I defined a "new" label as "[Ed. ". The caption is thus not a
"standard" caption.

It works fine : the equations are sequentially numbered and the number comes
on the right place, at the far-right end of the equation line.

The problem comes when I want to reference an equation somewhere in the text
: I use the menu item "Insert - Reference - Cross reference" and then choose
the correct equation in the list. Whatever I ask to insert ("Entire caption"
/ "Only label and number" / "Only caption text") the whole line gets
inserted, i.e. the complete equation, the caption label and the equation
number.

Can anyone give me a hint on how to insert only the equation number and not
the whole line (paragraph ?).

Thank you in advance.

Jean-Pierre

 

[Suzanne S. Barnhill]

If you're in Word 2002 or 2003, instead of just removing the borders (before
creating your AutoText entry), try applying the Table Normal table style
(instead of Table Grid). If this doesn't help, a quick shortcut to remove
table borders is Ctrl+Alt+U (or use the No Borders button on the Borders
flyout on the Formatting toolbar).

If you're not using any bordered tables elsewhere in the document, you might
want to select Table Normal as the default table AutoFormat for your
document (Table | Table AutoFormat | Table Normal: Default...).

I tried the idea, placing a dummy equation and caption in a table (2 col, 1
line, borderless) and defining it in an autotext entry. Borders were deleted
through the menu "Format / Borders and shadings / Borders -> none " . The
whole table (including the paragraph mark) was selected before doing so

However, when I insert a new such "table", the dummy equation number
increases, which is correct, but the new table is inserted WITH borders.

Can it be avoided, or do I have to delete the borders every time ?

Jean-Pierre
=========================

Unfortunately, Word inserts the caption bookmark around the whole paragraph.
The only way to avoid this (short of getting MathType) is to put the
equation and its caption in the left and right cells of a single-row,
two-column borderless table. If you save a sample table (with dummy equation
and caption) as an AutoText entry, it is fairly trivial to insert.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

Email cannot be acknowledged; please post all follow-ups to the

newsgroup

so
all may benefit.

Thus
the

what

I

want, as I want the equation number to be on the same line as the equation.

Note : I defined a "new" label as "[Ed. ". The caption is thus not a
"standard" caption.

It works fine : the equations are sequentially numbered and the number comes
on the right place, at the far-right end of the equation line.

The problem comes when I want to reference an equation somewhere in

the
text

: I use the menu item "Insert - Reference - Cross reference" and then choose
the correct equation in the list. Whatever I ask to insert ("Entire caption"
/ "Only label and number" / "Only caption text") the whole line gets
inserted, i.e. the complete equation, the caption label and the equation
number.

Can anyone give me a hint on how to insert only the equation number

and
not

the whole line (paragraph ?).

Thank you in advance.

Jean-Pierre

 

[Jean-Pierre]

Thank you very much for the procedure. I try it soon.

Jean-Pierre
===================================

If you're in Word 2002 or 2003, instead of just removing the borders (before
creating your AutoText entry), try applying the Table Normal table style
(instead of Table Grid). If this doesn't help, a quick shortcut to remove
table borders is Ctrl+Alt+U (or use the No Borders button on the Borders
flyout on the Formatting toolbar).

If you're not using any bordered tables elsewhere in the document, you might
want to select Table Normal as the default table AutoFormat for your
document (Table | Table AutoFormat | Table Normal: Default...).

I tried the idea, placing a dummy equation and caption in a table (2

col,

1
line, borderless) and defining it in an autotext entry. Borders were deleted
through the menu "Format / Borders and shadings / Borders -> none " . The
whole table (including the paragraph mark) was selected before doing so

However, when I insert a new such "table", the dummy equation number
increases, which is correct, but the new table is inserted WITH borders.

Can it be avoided, or do I have to delete the borders every time ?

Jean-Pierre
=========================

Unfortunately, Word inserts the caption bookmark around the whole paragraph.
The only way to avoid this (short of getting MathType) is to put the
equation and its caption in the left and right cells of a single-row,
two-column borderless table. If you save a sample table (with dummy equation
and caption) as an AutoText entry, it is fairly trivial to insert.

--
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA

Email cannot be acknowledged; please post all follow-ups to the

newsgroup

so
all may benefit.

I am using WORD2002-SP3, with W2K-SP4

I write equations using the equation editor included in WORD. I want to
number these equations automatically. There for I use the insert a
"caption"
from the "Insert - Reference - Caption" menu. I place this caption

at
the

right edge of the line of the equation using the right tabulation. Thus
the
"caption is located in the same paragraph as the equation, which is

what

I
want, as I want the equation number to be on the same line as the
equation.

Note : I defined a "new" label as "[Ed. ". The caption is thus not a
"standard" caption.

It works fine : the equations are sequentially numbered and the number
comes
on the right place, at the far-right end of the equation line.

The problem comes when I want to reference an equation somewhere in the
text
: I use the menu item "Insert - Reference - Cross reference" and then
choose
the correct equation in the list. Whatever I ask to insert ("Entire
caption"
/ "Only label and number" / "Only caption text") the whole line gets
inserted, i.e. the complete equation, the caption label and the equation
number.

Can anyone give me a hint on how to insert only the equation number and
not
the whole line (paragraph ?).

Thank you in advance.

Jean-Pierre