Possible VB Library incompatibility Issue

[Gary]

I have developed an MDE database using Access 2000 SP 1A. Don't remember the JET SP ? but its not SP8. I am using win 2k O

The MDE database is running on XP OS with Access 2002 (or XP) and Access 2003. I don't know if the installation of the newer Access (i.e. 2002 and 2003) updated their JET or not. My MDE is running

I currently have a problem with a notebook which has Win 98 v2 OS with Access 2000. The MDE starts and depending on what I do in the problem, I set various error messages. Some of the errors are as follow

1) A Folder or Database is Read-Onl
I made sure they are all read/write or Read-only removed

2) "The Microsoft Jet database Engine could not find object" and it was a filename I pass to the problem

Someone suggestion that the JETS are incompatible from what I built the MDE with and what they are running?

Does anyone have any suggestions for me?

Gar

 

[Eric Butts [MSFT]]

Hi Gary,

The Microsoft JET Database Engine is not updated via the install of Office
products. To update the version of JET see: How To: Obtain the Latest
Service Pack for the Microsoft Jet 4.0 Database Engine
http://support.microsoft.com/default.aspx?scid=kb;en-us;239114

To compare the version of the JET Engine on each machine take a look at the
version number of the file "MsJet40.dll". The latest version is 4.0.8015.0
(sp8).

There are cases but very uncommon (RARE) cases where the same version of
the JET Engine behaves differently on WinXP versus Win2k versus Win9x
machines.


I hope this helps! If you have additional questions on this topic, please
respond back to this posting.


Regards,

Eric Butts
Microsoft Access Support
(e-mail address removed)
"Microsoft Security Announcement: Have you installed the patch for
Microsoft Security Bulletin MS03-026? If not Microsoft strongly advises
you to review the information at the following link regarding Microsoft
Security Bulletin MS03-026
<http://www.microsoft.com/security/security_bulletins/ms03-026.asp> and/or
to visit Windows Update at <http://windowsupdate.microsoft.com/> to install
the patch. Running the SCAN program from the Windows Update site will help
to insure you are current with all security patches, not just MS03-026."

This posting is provided "AS IS" with no warranties, and confers no rights


--------------------
| Thread-Topic: Possible VB Library incompatibility Issue
| thread-index: AcQcvQUp6UE42H6cR8+qOIX3+4lziQ==
| X-Tomcat-NG: microsoft.public.access.setupconfig
| From: "=?Utf-8?B?R2FyeQ==?=" <[email protected]>
| Subject: Possible VB Library incompatibility Issue
| Date: Wed, 7 Apr 2004 09:26:03 -0700
| Lines: 19
| Message-ID: <[email protected]>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
| Newsgroups: microsoft.public.access.setupconfig
| Path: cpmsftngxa06.phx.gbl
| Xref: cpmsftngxa06.phx.gbl microsoft.public.access.setupconfig:29736
| NNTP-Posting-Host: tk2msftcmty1.phx.gbl 10.40.1.180
| X-Tomcat-NG: microsoft.public.access.setupconfig
|
| I have developed an MDE database using Access 2000 SP 1A. Don't remember
the JET SP ? but its not SP8. I am using win 2k OS

The MDE database is running on XP OS with Access 2002 (or XP) and Access
2003. I don't know if the installation of the newer Access (i.e. 2002 and
2003) updated their JET or not. My MDE is running.

I currently have a problem with a notebook which has Win 98 v2 OS with
Access 2000. The MDE starts and depending on what I do in the problem, I
set various error messages. Some of the errors are as follow:

1) A Folder or Database is Read-Only
I made sure they are all read/write or Read-only removed.

2) "The Microsoft Jet database Engine could not find object" and it was a
filename I pass to the problem.

Someone suggestion that the JETS are incompatible from what I built the MDE
with and what they are running??


Does anyone have any suggestions for me??


Gary

|

 

[Gary]

Clearification

On my original post, I said "I set various error messages". What it should have been "I see various erorr messages"

I would like possible suggestions that me resolve this issue

Thanks Again

Gary

 

[Eric Butts [MSFT]]

Hi Gary,

It's preferred to have the latest version of JET installed. As far as
using different versions of JET think of it this way:

Computer 1: has JET 4.0 sp5
Computer 2: has JET 4.0 sp6
Computer 3: has JET 4.0 sp7
Computer 4: has JET 4.0 sp8

All are using the same MDB/MDE file. Each of the above users report back
differing results. Also pretend for a moment that the MDB/MDE file is in a
shared folder that they are all accessing. In addition to the differing
results now your MDB/MDE file is experiencing corruption as a result of the
different versions of JET hitting the file.

Now for another scenario; again this is very RARE:

Computer 1 -- WinXP: has JET 4.0 sp8
Computer 2 -- Win2000: has JET 4.0 sp8
Computer 3 -- WinME: has JET 4.0 sp8
Computer 4 -- Win98: has JET 4.0 sp8

All of the above the JET Engine behaves differently.

What I would recommend you do is to install the latest version of JET on
your developer machine. Take your original MDB file and Compact/Repair it,
then create a new MDE file.


Regards,

Eric Butts
Microsoft Access Support
(e-mail address removed)
"Microsoft Security Announcement: Have you installed the patch for
Microsoft Security Bulletin MS03-026? If not Microsoft strongly advises
you to review the information at the following link regarding Microsoft
Security Bulletin MS03-026
<http://www.microsoft.com/security/security_bulletins/ms03-026.asp> and/or
to visit Windows Update at <http://windowsupdate.microsoft.com/> to install
the patch. Running the SCAN program from the Windows Update site will help
to insure you are current with all security patches, not just MS03-026."

This posting is provided "AS IS" with no warranties, and confers no rights

--------------------
| Thread-Topic: Possible VB Library incompatibility Issue
| thread-index: AcQc7p0NJBgsJZCjSte9myFTWuX1OQ==
| X-Tomcat-NG: microsoft.public.access.setupconfig
| From: "=?Utf-8?B?R2FyeQ==?=" <[email protected]>
| References: <[email protected]>
<[email protected]>
| Subject: RE: Possible VB Library incompatibility Issue
| Date: Wed, 7 Apr 2004 15:21:03 -0700
| Lines: 10
| Message-ID: <[email protected]>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
| Newsgroups: microsoft.public.access.setupconfig
| Path: cpmsftngxa06.phx.gbl
| Xref: cpmsftngxa06.phx.gbl microsoft.public.access.setupconfig:29743
| NNTP-Posting-Host: tk2msftcmty1.phx.gbl 10.40.1.180
| X-Tomcat-NG: microsoft.public.access.setupconfig
|
| Clearification:

On my original post, I said "I set various error messages". What it
should have been "I see various erorr messages".

I would like possible suggestions that me resolve this issue.


Thanks Again.

Gary
|