Run-Time error '9' Subscript out of Range

B

Bud

Hello

I am getting an error Run-Time error '9': Subscript out of range on this
specific statement.
Sheets("Sheet1").Select

I get this when someone runs through the macro successfully and than without
closing the excel workbook they copy in new data in the SWIMInput worksheet
and than tries to run the macro again ctrl+Shift+U

I already have logic at the front of the macro looking to see if someone
even entered data and than place out a message to close the workbook first.

Is there a way to prevent them from entering data in that SWIMInput data
once they run through the macro and before they close it?

I want them to be able to copy into that SWIMInput worksheet once, run the
macro and than NOT enter anything further into SWIMInput until they close and
re-open it....or catch that they entred data into it again before closing it
and put a message out

Sub SWIM()
'
' SWIM Macro
' Macro recorded 1/10/2009 by czj63c
' Bud Zeiger
'
' Keyboard Shortcut: Ctrl+Shift+U
'
'Let's check to see if we have any data or the right data
Sheets("SWIMInput").Select
Range("a1").Select
If ActiveCell.FormulaR1C1 <> "EDSNETID" Then
MsgBox "Please close workbook, re-open, and paste SWIM_Master_Input
MSPS info into SWIMInput worksheet"
Exit Sub
End If

'Start of selecting SWIM Time Data deleting and than re-creating
Sheets("SWIM Time Data").Select
Application.CutCopyMode = False
Selection.Delete Shift:=xlUp
Application.DisplayAlerts = False
ActiveWindow.SelectedSheets.Delete
Application.DisplayAlerts = True
Application.DisplayAlerts = False
Sheets.Add
Sheets("Sheet1").Select
Sheets("Sheet1").Name = "SWIM Time Data"
'End of selecting SWIM Time Data deleting and than re-creating

'Start of adding SWIMTimeDataSav so it can be used a temp area

Sheets.Add
Sheets("Sheet2").Select
Sheets("Sheet2").Name = "SWIMTimeDataSav"
'End of adding temporary SWIMTimeDataSav

'This next statement turns off the screen updating while the macro is
running
Application.ScreenUpdating = False

Dim br As Long
Dim strDate As String 'Current system date

'Select SAPTasks and count the number of active rows
Sheets("SWIMInput").Select
Cells.Select
br = Cells(Rows.Count, "b").End(xlUp).Row
strDate = Format(Now, "ddmmmyyyy")

'Sort the data
Range("A2").Select
Selection.Sort Key1:=Range("A2"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortTextAsNumbers



'MsgBox br

'Select SWIMTimeDataSav as we are going to build the UPLOAD file
Sheets("SWIMTimeDataSav").Select
Cells.Select
' First Clear all contents of worksheet
ActiveSheet.Cells.ClearContents
' Second Add a line that describes the data fields
' Also add the formulas for obtaining the data

Cells(1, "a") = "Employee"
Cells(1, "b") = "Date (dd-mmm-yyyy)"
Cells(1, "c") = "Start Time (hh:mm)"
Cells(1, "d") = "End Time (hh:mm)"
Cells(1, "e") = "Duration (Hrs)"
Cells(1, "f") = "Work Breakdown Structure Element(WBSE)"
Cells(1, "g") = "Line Item Text"
Cells(1, "h") = "Employee Name"
Cells(1, "i") = "Project Name"

Cells(2, "a") = "=SWIMInput!A2" 'Employee
Cells(2, "b") = strDate 'Todays date
Cells(2, "g") = "=SWIMInput!B2" 'Task Name
Cells(2, "f") = "=SWIMInput!C2" 'WBSE
Cells(2, "i") = "=SWIMInput!D2" 'Project Name
' The next matching formula concatenates the number of records in
SWIMInput for knowing when to stop on the fill down
Cells(2, "h") = "=IF($a$2:$a$" & br & "="""","""",(INDEX('SWIM Employee
Details'!$c$1:$c$1000,MATCH($a$2:$a" & br & ",'SWIM Employee
Details'!$A$1:$A$1000,0))))"
' Thirdly Auto fill down for the number rows we obtained from the
SAP-Simulation


If br > 2 Then
Cells(2, "a").AutoFill Destination:=Range(Cells(2, "a"), Cells(br,
"a"))
'Cells(2, "b").AutoFill Destination:=Range(Cells(2, "b"), Cells(br,
"b"))
' Changed B to copy instead so the value does not increase by one
each row filling down
Cells(2, "b").Copy Destination:=Range(Cells(2, "b"), Cells(br, "b"))
Cells(2, "f").AutoFill Destination:=Range(Cells(2, "f"), Cells(br,
"f"))
Cells(2, "g").AutoFill Destination:=Range(Cells(2, "g"), Cells(br,
"g"))
Cells(2, "i").AutoFill Destination:=Range(Cells(2, "i"), Cells(br,
"i"))
Cells(2, "h").AutoFill Destination:=Range(Cells(2, "h"), Cells(br,
"h"))
End If


'Wrapping text Begin
Range("B1").Select
With Selection
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
Range("C1").Select
With Selection
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
Range("D1").Select
With Selection
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
Range("E1").Select
With Selection
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
Range("f1").Select
With Selection
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
Range("G1").Select
With Selection
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
Range("i1").Select
With Selection
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With


Sheets("SWIMTimeDataSav").Select
Cells.Select
Selection.Copy
Sheets("SWIM Time Data").Select
Cells.Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False

'Wrapping text Begin
Range("B1").Select
With Selection
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
Range("c1").Select
With Selection
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
Range("d1").Select
With Selection
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
Range("e1").Select
With Selection
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
Range("f1").Select
With Selection
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With

Range("A1:I1").Select
With Selection.Interior
.ColorIndex = 4
.Pattern = xlSolid
End With

Rows("1:1").RowHeight = 39.75

Columns("A:A").ColumnWidth = 7.8
Columns("B:B").ColumnWidth = 13.13
Columns("C:C").ColumnWidth = 9.5
Columns("D:D").ColumnWidth = 7.4
Columns("E:E").ColumnWidth = 7.75
Columns("F:F").ColumnWidth = 24.75
Columns("g:g").ColumnWidth = 44.25
Columns("h:h").ColumnWidth = 13.5
Columns("i:i").ColumnWidth = 20.7




'Start of selecting SWIMInput deleting and than re-creating
Sheets("SWIMInput").Select
Application.CutCopyMode = False
Selection.Delete Shift:=xlUp
Application.DisplayAlerts = False
ActiveWindow.SelectedSheets.Delete
Application.DisplayAlerts = True
Application.DisplayAlerts = False
Sheets.Add
Sheets("Sheet3").Select
Sheets("Sheet3").Name = "SWIMInput"
'End of selecting SWIMInput deleting and than re-creating

'Hiding the saved file
'Sheets("SWIMTimeDataSav").Select
'ActiveWindow.SelectedSheets.Visible = False

'Start of selecting temporary built file SWIMTimeDataSav and deleting it
Sheets("SWIMTimeDataSav").Select
Application.CutCopyMode = False
Selection.Delete Shift:=xlUp
Application.DisplayAlerts = False
ActiveWindow.SelectedSheets.Delete


'SWIM WBSE Details worksheet
'Start of pasting to the SWIM WBSE Details worksheet
' Buds logic to clear contents and add SWIM WBSE Details
Sheets("SWIM WBSE Details").Select
Cells.Select
ActiveSheet.Cells.ClearContents ' First Clear all contents of worksheet
Cells(1, "a") = "WBSE Number" ' Second Add a line that
describes the data fields
Cells(1, "b") = "WBSE Description" ' Second Add a line that
describes the data fields
Cells(1, "c") = "Project Cost Centre" ' Second Add a line that
describes the data fields
' Also add the formulas for obtaining the data
Cells(2, "a") = "='SWIM Time Data'!F2" 'WBSE Number
Cells(2, "b") = "='SWIM Time Data'!I2" 'Project name

'An alternative to Buds logic to clear contents and add SWIM WBSE Details
'Sheets("SWIM WBSE Details").Activate
'Mike H suggested this from Microsofts discussion group Excel programming
'
' With Sheets("SWIM WBSE Details")
' .UsedRange.ClearContents ' First Clear all contents of
worksheet
' .Cells(1, "b") = "WBSE Description"
' .Cells(1, "c") = "Project Cost Centre"
' .Cells(2, "a") = "='SWIM Time Data'!F2" 'WBSE Number
' .Cells(2, "b") = "='SWIM Time Data'!I2" 'Project name
' End With

' Thirdly Auto fill down for the number rows we obtained from the
SAP-Simulation

If br > 2 Then
Cells(2, "a").AutoFill Destination:=Range(Cells(2, "a"), Cells(br,
"a"))
Cells(2, "b").AutoFill Destination:=Range(Cells(2, "b"), Cells(br,
"b"))
End If

'After copying the data over with above logic the next two lines will
recopy and paste the values themselves
' instead of having the reference formula in the field
Range("A2:b" & br).Copy
Range("A2").PasteSpecial Paste:=xlPasteValues


Columns("A:A").ColumnWidth = 24.75
Columns("B:B").ColumnWidth = 20.7
Range("A2").Select
Selection.Sort Key1:=Range("A2"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal

'Start Deleting duplicates for the WBSE Details worksheet to have only one
'Chip Pearson suggested this from Microsofts discussion group Excel
programming Thank You Chip

Dim LastRow As Long
Dim RowNdx As Long
Dim StartRow As Long
Dim WS As Worksheet
Dim RR As Range
Dim ColumnLetter As String

'Change the StartRow value to the row number at which the sorted data
starts.
'Change ColumnLetter to the column which will be examined for duplicates.

StartRow = 2 '<<< CHANGE AS REQUIRED
ColumnLetter = "A" '<<< CHANGE AS REQUIRED
Set WS = ActiveSheet
With WS
LastRow = .Cells(.Rows.Count, ColumnLetter).End(xlUp).Row
For RowNdx = LastRow To StartRow + 1 Step -1
Set RR = .Range(.Cells(StartRow, ColumnLetter), _
.Cells(RowNdx - 1, ColumnLetter))
If Application.CountIf(RR, .Cells(RowNdx, ColumnLetter)) <> 0 Then
.Rows(RowNdx).Delete
End If
Next RowNdx
End With




'End Deleting duplicates for the WBSE Details worksheet to have only one

Sheets("SWIM Time Data").Select
Cells.Select
Range("E2").Select

End Sub
 
J

Joel

The Sheets.Add is creating a new workbook because you didn't use the After
Property. Try these changes



Sheets.Add
Sheets("Sheet1").Select
Sheets("Sheet1").Name = "SWIM Time Data"


I updated your entire macro. Avoid using the select method. Also check the
variable BR. I don't know if it is the same on all sheets. Your code isn't
setting BR as you go from sheet to sheet.



Sub SWIM()
'
' SWIM Macro
' Macro recorded 1/10/2009 by czj63c
' Bud Zeiger
'
' Keyboard Shortcut: Ctrl+Shift+U
'
'Let's check to see if we have any data or the right data
With Sheets("SWIMInput").Range("a1")
If .FormulaR1C1 <> "EDSNETID" Then
MsgBox "Please close workbook, re-open, and paste SWIM_Master_Input
MSPS info into SWIMInput worksheet"
Exit Sub
End If
End With

'Start of selecting SWIM Time Data deleting and than re-creating
With Sheets("SWIM Time Data")
Application.CutCopyMode = False
.Rows(1).Delete
Application.DisplayAlerts = False
ActiveWindow.SelectedSheets.Delete
Application.DisplayAlerts = True
Application.DisplayAlerts = False
End With
Sheets.Add after:=Sheets(Sheets.Count)
Set NewSht1 = ActiveSheet
NewSht1.Name = "SWIM Time Data"
'End of selecting SWIM Time Data deleting and than re-creating

'Start of adding SWIMTimeDataSav so it can be used a temp area

Sheets.Add after:=Sheets(Sheets.Count)
Set NewSht2 = ActiveSheet
NewSht2.Name = "SWIMTimeDataSav"
'End of adding temporary SWIMTimeDataSav

'This next statement turns off the screen updating while the macro is
running
Application.ScreenUpdating = False

Dim br As Long
Dim strDate As String 'Current system date

'Select SAPTasks and count the number of active rows
With Sheets("SWIMInput")
br = .Cells(Rows.Count, "b").End(xlUp).Row
strDate = Format(Now, "ddmmmyyyy")

'Sort the data
Set SortRange = .Rows("2:" & br)
SortRange.Sort _
Key1:=.Range("A2"), _
Order1:=xlAscending, _
Header:=xlNo, _
OrderCustom:=1, _
DataOption1:=xlSortTextAsNumbers
End With

'MsgBox br

'Select SWIMTimeDataSav as we are going to build the UPLOAD file
With Sheets("SWIMTimeDataSav")
' First Clear all contents of worksheet
.Cells.ClearContents
' Second Add a line that describes the data fields
' Also add the formulas for obtaining the data

.Cells(1, "a") = "Employee"
.Cells(1, "b") = "Date (dd-mmm-yyyy)"
.Cells(1, "c") = "Start Time (hh:mm)"
.Cells(1, "d") = "End Time (hh:mm)"
.Cells(1, "e") = "Duration (Hrs)"
.Cells(1, "f") = "Work Breakdown Structure Element(WBSE)"
.Cells(1, "g") = "Line Item Text"
.Cells(1, "h") = "Employee Name"
.Cells(1, "i") = "Project Name"

.Cells(2, "a") = "=SWIMInput!A2" 'Employee
.Cells(2, "b") = strDate 'Todays date
.Cells(2, "g") = "=SWIMInput!B2" 'Task Name
.Cells(2, "f") = "=SWIMInput!C2" 'WBSE
.Cells(2, "i") = "=SWIMInput!D2" 'Project Name
' The next matching formula concatenates the number of records in
'SWIMInput for knowing when to stop on the fill down
.Cells(2, "h") = "=IF($a$2:$a$" & br & "="""","""",(INDEX('SWIM
Employee Details'!$c$1:$c$1000,MATCH($a$2:$a" & br & ",'SWIM Employee
Details'$A$1:$A$1000,0))))"
' Thirdly Auto fill down for the number rows we obtained from the
SAP-Simulation


If br > 2 Then
.Cells(2, "a").AutoFill Destination:=.Range(.Cells(2, "a"),
..Cells(br, "a"))
'.Cells(2, "b").AutoFill Destination:=.Range(.Cells(2, "b"),
..Cells(br, "b"))
' Changed B to copy instead so the value does not increase by one
each row filling down
.Cells(2, "b").Copy Destination:=.Range(.Cells(2, "b"), .Cells(br,
"b"))
.Cells(2, "f").AutoFill Destination:=.Range(.Cells(2, "f"),
..Cells(br, "f"))
.Cells(2, "g").AutoFill Destination:=.Range(.Cells(2, "g"),
..Cells(br, "g"))
.Cells(2, "i").AutoFill Destination:=.Range(.Cells(2, "i"),
..Cells(br, "i"))
.Cells(2, "h").AutoFill Destination:=.Range(.Cells(2, "h"),
..Cells(br, "h"))
End If


'Wrapping text Begin
With .Range("B1")
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
With .Range("C1")
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
With .Range("D1")
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
With .Range("E1")
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
With .Range("f1")
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
With .Range("G1")
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
With .Range("i1")
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
End With

Sheets("SWIMTimeDataSav").Cells.Copy
With Sheets("SWIM Time Data")
.Cells.PasteSpecial _
Paste:=xlPasteValuesAndNumberFormats

'Wrapping text Begin
With .Range("B1")
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
With .Range("c1")
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
With .Range("d1")
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
With .Range("e1")
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With
With .Range("f1")
.HorizontalAlignment = xlGeneral
.VerticalAlignment = xlBottom
.WrapText = True
.Orientation = 0
.AddIndent = False
.IndentLevel = 0
.ShrinkToFit = False
.ReadingOrder = xlContext
.MergeCells = False
End With

With .Range("A1:I1").Interior
.ColorIndex = 4
.Pattern = xlSolid
End With

.Rows("1:1").RowHeight = 39.75

.Columns("A:A").ColumnWidth = 7.8
.Columns("B:B").ColumnWidth = 13.13
.Columns("C:C").ColumnWidth = 9.5
.Columns("D:D").ColumnWidth = 7.4
.Columns("E:E").ColumnWidth = 7.75
.Columns("F:F").ColumnWidth = 24.75
.Columns("g:g").ColumnWidth = 44.25
.Columns("h:h").ColumnWidth = 13.5
.Columns("i:i").ColumnWidth = 20.7
End With



'Start of selecting SWIMInput deleting and than re-creating
Application.CutCopyMode = False
Sheets("SWIMInput").Delete

Application.DisplayAlerts = False
ActiveWindow.SelectedSheets.Delete
Application.DisplayAlerts = True
Application.DisplayAlerts = False

Sheets.Add after:=Sheets(Sheets.Count)
Set NewSht3 = ActiveSheet
NewSht3.Name = "SWIMInput"
'End of selecting SWIMInput deleting and than re-creating

'Hiding the saved file
'Sheets("SWIMTimeDataSav").Select
'ActiveWindow.SelectedSheets.Visible = False
'Start of selecting temporary built file SWIMTimeDataSav and deleting it

With Sheets("SWIMTimeDataSav")
Application.CutCopyMode = False
.Rows(1).Delete
Application.DisplayAlerts = False
ActiveWindow.SelectedSheets.Delete
End With

'SWIM WBSE Details worksheet
'Start of pasting to the SWIM WBSE Details worksheet
' Buds logic to clear contents and add SWIM WBSE Details
With Sheets("SWIM WBSE Details")
Cells.Select
.Cells.ClearContents ' First Clear all contents of worksheet
.Cells(1, "a") = "WBSE Number" ' Second Add a line that
describes the data fields
.Cells(1, "b") = "WBSE Description" ' Second Add a line that
describes the data fields
.Cells(1, "c") = "Project Cost Centre" ' Second Add a line that
describes the data fields
' Also add the formulas for obtaining the data
.Cells(2, "a") = "='SWIM Time Data'!F2" 'WBSE Number
.Cells(2, "b") = "='SWIM Time Data'!I2" 'Project name

'An alternative to Buds logic to clear contents and add SWIM WBSE Details
'Sheets("SWIM WBSE Details").Activate
'Mike H suggested this from Microsofts discussion group Excel programming
'
' With Sheets("SWIM WBSE Details")
' .UsedRange.ClearContents ' First Clear all contents of
worksheet
' .Cells(1, "b") = "WBSE Description"
' .Cells(1, "c") = "Project Cost Centre"
' .Cells(2, "a") = "='SWIM Time Data'!F2" 'WBSE Number
' .Cells(2, "b") = "='SWIM Time Data'!I2" 'Project name
' End With

' Thirdly Auto fill down for the number rows we obtained from the SAP
-Simulation

If br > 2 Then
.Cells(2, "a").AutoFill Destination:=.Range(.Cells(2, "a"),
..Cells(br, "a"))
.Cells(2, "b").AutoFill Destination:=.Range(.Cells(2, "b"),
..Cells(br, "b"))
End If

'After copying the data over with above logic the next two lines will
recopy and paste the values themselves
' instead of having the reference formula in the field
.Range("A2:b" & br).Copy
.Range("A2").PasteSpecial Paste:=xlPasteValues


.Columns("A:A").ColumnWidth = 24.75
.Columns("B:B").ColumnWidth = 20.7
Set SortRange = Rows("2:" & br)
SortRange.Range("A2").Sort _
Key1:=Range("A2"), _
Order1:=xlAscending, _
Header:=xlNo

'Start Deleting duplicates for the WBSE Details worksheet to have only one
'Chip Pearson suggested this from Microsofts discussion group Excel
programming Thank You Chip

Dim LastRow As Long
Dim RowNdx As Long
Dim StartRow As Long
Dim WS As Worksheet
Dim RR As Range
Dim ColumnLetter As String

'Change the StartRow value to the row number at which the sorted data
starts.
'Change ColumnLetter to the column which will be examined for duplicates.

StartRow = 2 '<<< CHANGE AS REQUIRED
ColumnLetter = "A" '<<< CHANGE AS REQUIRED
LastRow = .Cells(.Rows.Count, ColumnLetter).End(xlUp).Row
For RowNdx = LastRow To StartRow + 1 Step -1
Set RR = .Range(.Cells(StartRow, ColumnLetter), _
.Cells(RowNdx - 1, ColumnLetter))
If Application.CountIf(RR, .Cells(RowNdx, ColumnLetter)) <> 0 Then
.Rows(RowNdx).Delete
End If
Next RowNdx
End With




'End Deleting duplicates for the WBSE Details worksheet to have only one

Sheets("SWIM Time Data").Range("E2").Select

End Sub
 
B

Bud

I now get a 1004 error ...Cannot rename a sheet to the same name as another
sheet, a referenced object library or a workbook referenced by Visual Basic.

Get's the error here....NewSht1.Name = "SWIM Time Data"
 
J

Joel

You have two sheets with the same name. This is not my problem. Delete one
of the duplicate sheets or change the name of the sheet is the macro.
 
B

Bud

It's a name already in the workbook...Been there

Sorry, this isn't solving the problem...I'll have to think about some more
or ask for other help or something.
 
J

Joel

You have a lot of good code. Here are some comments that may help you solve
your problems.

1) Do you want to create the new sheets in the same workbook or a new
workbook. The original code was creating the sheets in a new workbook.

2) When you are adding sheets do you really want to add the sheets if they
are already in the workbook. One thing you can do is check if the sheet
exists. if it exists then clear the worksheet, otherwise, add the worksheet.

I will modify the code any way you want as long as I'm given the right
inputs to work with. Some of the comments in the original code referes to
deleting a worksheet and then adding the sheet. I think it is better to
check if the worksheet exists and then determining what to do base if the
sheet exists. This is code I often use to check if a sheet exists

Found = False
for each sht in sheets
if sht.name = "SWIM Time Data" then
Found = True
Exit For
end if
next sht

If Found = true then
Sheets("SWIM Time Data").Cells.Clearcontents
else
Sheets.Add After:=Sheets(Sheets.Count)
ActiveSheet.Name = "SWIM Time Data"
End if
 
B

Bud

Joel

I replied Yes to "Did this post answer the question" to each of your replies
and when I hover over it it says that is isn't rated yet. What's the issue
with that do you know? maybe it's just a timing thing.
 
J

Joel

I don't really care about the rating system. I've been a Two for about 2
years and should be a 1. Microsoft software never works very well. thats
why there are so many questions at this site. Microsoft doesn't document
there products very well and relies on the users to help each other.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Using Sheets.Add after and want to keep a sheet as the first sheet 2
Modify Recorded Macro 1
Run Time error 1004 - Pastespecial method of range class failed. 3
Run-Time error 1004 in Autofill method of rangle class failed 2
keep getting the error message - Compile error: Else without If 2
piece of code keeps failing.... 2
Condense code 2
Error with calling Format sub 7

Top