Unable to create a http protocol url for my web page form

[jewlery]

I am using Microsoft Publisher 2003. I have received the url information
from my hosting service to create a new network place. Everytime I type my
http protocol url in the File Name box I get the following error message:
"Cannot find the url http://jewlery.fatcow.com"

Can someone please help me. I really need to get the web page form to work
as soon as possible.

 

[David Bartosik]

I see the site is published. Is this still a valid issue? If so please work
thru http://www.publishermvps.com/Default.aspx?tabid=158

 

[jewlery]

The site is published through FTP. I need to publish it using http so my
contact
form will send me the data entered by my contacts. I am unable to create a
http
protocol. I keep getting the error messages : ""Cannot find the url
http://jewlery.fatcow.com" I know the url works because it works in the
browser. I have followed microsoft's instructions on how to create the http
protocol in the network place but I am still unable to create the protocol.

I see the site is published. Is this still a valid issue? If so please work
thru http://www.publishermvps.com/Default.aspx?tabid=158

--
David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com

I am using Microsoft Publisher 2003. I have received the url information
from my hosting service to create a new network place. Everytime I type my
http protocol url in the File Name box I get the following error message:
"Cannot find the url http://jewlery.fatcow.com"

Can someone please help me. I really need to get the web page form to work
as soon as possible.

 

[David Bartosik [MSFT MVP]]

I browsed to http://jewlery.fatcow.com/_vti_inf.html and thus confirmed
that FPSE is installed on your web space. If you read the FAQ
http://www.publishermvps.com/Default.aspx?tabid=30 and the uploading trouble
shooting article you'd have learned that FTP usage on FPSE can break FPSE.
Your next course of action is to tell the host to reinstall FPSE. When they
have that completed then follow my http publishing article.

David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com

The site is published through FTP. I need to publish it using http so my
contact
form will send me the data entered by my contacts. I am unable to create
a
http
protocol. I keep getting the error messages : ""Cannot find the url
http://jewlery.fatcow.com" I know the url works because it works in the
browser. I have followed microsoft's instructions on how to create the
http
protocol in the network place but I am still unable to create the
protocol.

I see the site is published. Is this still a valid issue? If so please
work
thru http://www.publishermvps.com/Default.aspx?tabid=158

--
David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com

I am using Microsoft Publisher 2003. I have received the url
information
from my hosting service to create a new network place. Everytime I
type my
http protocol url in the File Name box I get the following error
message:
"Cannot find the url http://jewlery.fatcow.com"

Can someone please help me. I really need to get the web page form to
work
as soon as possible.

 

[jewlery]

I have spoken to my web host service about reinstalling FPSE. However they
were a little reluctant about doing this and said they would get back to me
in 24 to 48 hours. In case they will not do this I noticed in your trouble
shooting area you can setup forms without using FTP or FPSE by clicking on
use the ISP in the form property. If I go this route can I use it if I have
published my site using FTP. Just trying to find out what my options are if
my web host service does not reinstall FPSE. I have paid for this service
for a year and do not want to lose my money. I am using a trial version of
Microsoft Publisher 2003 and want this problem resolved before I make the
decision to purchase the full version.

I browsed to http://jewlery.fatcow.com/_vti_inf.html and thus confirmed
that FPSE is installed on your web space. If you read the FAQ
http://www.publishermvps.com/Default.aspx?tabid=30 and the uploading trouble
shooting article you'd have learned that FTP usage on FPSE can break FPSE.
Your next course of action is to tell the host to reinstall FPSE. When they
have that completed then follow my http publishing article.

David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com

The site is published through FTP. I need to publish it using http so my
contact
form will send me the data entered by my contacts. I am unable to create
a
http
protocol. I keep getting the error messages : ""Cannot find the url
http://jewlery.fatcow.com" I know the url works because it works in the
browser. I have followed microsoft's instructions on how to create the
http
protocol in the network place but I am still unable to create the
protocol.

I see the site is published. Is this still a valid issue? If so please
work
thru http://www.publishermvps.com/Default.aspx?tabid=158

--
David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com



:

I am using Microsoft Publisher 2003. I have received the url
information
from my hosting service to create a new network place. Everytime I
type my
http protocol url in the File Name box I get the following error
message:
"Cannot find the url http://jewlery.fatcow.com"

Can someone please help me. I really need to get the web page form to
work
as soon as possible.

 

[Rob Giordano \(Crash\)]

Install/reinstalling the fpse takes like 10 seconds dunno why they would be
reluctant to push a button for you.

I have spoken to my web host service about reinstalling FPSE. However they
were a little reluctant about doing this and said they would get back to
me
in 24 to 48 hours. In case they will not do this I noticed in your
trouble
shooting area you can setup forms without using FTP or FPSE by clicking on
use the ISP in the form property. If I go this route can I use it if I
have
published my site using FTP. Just trying to find out what my options are
if
my web host service does not reinstall FPSE. I have paid for this service
for a year and do not want to lose my money. I am using a trial version
of
Microsoft Publisher 2003 and want this problem resolved before I make the
decision to purchase the full version.

I browsed to http://jewlery.fatcow.com/_vti_inf.html and thus confirmed
that FPSE is installed on your web space. If you read the FAQ
http://www.publishermvps.com/Default.aspx?tabid=30 and the uploading
trouble
shooting article you'd have learned that FTP usage on FPSE can break
FPSE.
Your next course of action is to tell the host to reinstall FPSE. When
they
have that completed then follow my http publishing article.

David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com

The site is published through FTP. I need to publish it using http so
my
contact
form will send me the data entered by my contacts. I am unable to
create
a
http
protocol. I keep getting the error messages : ""Cannot find the url
http://jewlery.fatcow.com" I know the url works because it works in
the
browser. I have followed microsoft's instructions on how to create the
http
protocol in the network place but I am still unable to create the
protocol.


:

I see the site is published. Is this still a valid issue? If so please
work
thru http://www.publishermvps.com/Default.aspx?tabid=158

--
David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com



:

I am using Microsoft Publisher 2003. I have received the url
information
from my hosting service to create a new network place. Everytime I
type my
http protocol url in the File Name box I get the following error
message:
"Cannot find the url http://jewlery.fatcow.com"

Can someone please help me. I really need to get the web page form
to
work
as soon as possible.

 

[jewlery]

They have reinstalled the fpse. But the form is still not working.

Install/reinstalling the fpse takes like 10 seconds dunno why they would be
reluctant to push a button for you.

I have spoken to my web host service about reinstalling FPSE. However they
were a little reluctant about doing this and said they would get back to
me
in 24 to 48 hours. In case they will not do this I noticed in your
trouble
shooting area you can setup forms without using FTP or FPSE by clicking on
use the ISP in the form property. If I go this route can I use it if I
have
published my site using FTP. Just trying to find out what my options are
if
my web host service does not reinstall FPSE. I have paid for this service
for a year and do not want to lose my money. I am using a trial version
of
Microsoft Publisher 2003 and want this problem resolved before I make the
decision to purchase the full version.

I browsed to http://jewlery.fatcow.com/_vti_inf.html and thus confirmed
that FPSE is installed on your web space. If you read the FAQ
http://www.publishermvps.com/Default.aspx?tabid=30 and the uploading
trouble
shooting article you'd have learned that FTP usage on FPSE can break
FPSE.
Your next course of action is to tell the host to reinstall FPSE. When
they
have that completed then follow my http publishing article.

David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com

The site is published through FTP. I need to publish it using http so
my
contact
form will send me the data entered by my contacts. I am unable to
create
a
http
protocol. I keep getting the error messages : ""Cannot find the url
http://jewlery.fatcow.com" I know the url works because it works in
the
browser. I have followed microsoft's instructions on how to create the
http
protocol in the network place but I am still unable to create the
protocol.


:

I see the site is published. Is this still a valid issue? If so please
work
thru http://www.publishermvps.com/Default.aspx?tabid=158

--
David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com



:

I am using Microsoft Publisher 2003. I have received the url
information
from my hosting service to create a new network place. Everytime I
type my
http protocol url in the File Name box I get the following error
message:
"Cannot find the url http://jewlery.fatcow.com"

Can someone please help me. I really need to get the web page form
to
work
as soon as possible.

 

[Rob Giordano \(Crash\)]

Ok, David or someone more experience with using Pub for web pages & forms is
gonna have to help you. From what i see the almost the entire page is
contained within Form tags and generally that is not how it should appear.

They have reinstalled the fpse. But the form is still not working.

Install/reinstalling the fpse takes like 10 seconds dunno why they would
be
reluctant to push a button for you.

I have spoken to my web host service about reinstalling FPSE. However
they
were a little reluctant about doing this and said they would get back
to
me
in 24 to 48 hours. In case they will not do this I noticed in your
trouble
shooting area you can setup forms without using FTP or FPSE by clicking
on
use the ISP in the form property. If I go this route can I use it if I
have
published my site using FTP. Just trying to find out what my options
are
if
my web host service does not reinstall FPSE. I have paid for this
service
for a year and do not want to lose my money. I am using a trial
version
of
Microsoft Publisher 2003 and want this problem resolved before I make
the
decision to purchase the full version.

:

I browsed to http://jewlery.fatcow.com/_vti_inf.html and thus
confirmed
that FPSE is installed on your web space. If you read the FAQ
http://www.publishermvps.com/Default.aspx?tabid=30 and the uploading
trouble
shooting article you'd have learned that FTP usage on FPSE can break
FPSE.
Your next course of action is to tell the host to reinstall FPSE. When
they
have that completed then follow my http publishing article.

David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com

The site is published through FTP. I need to publish it using http
so
my
contact
form will send me the data entered by my contacts. I am unable to
create
a
http
protocol. I keep getting the error messages : ""Cannot find the url
http://jewlery.fatcow.com" I know the url works because it works in
the
browser. I have followed microsoft's instructions on how to create
the
http
protocol in the network place but I am still unable to create the
protocol.


:

I see the site is published. Is this still a valid issue? If so
please
work
thru http://www.publishermvps.com/Default.aspx?tabid=158

--
David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com



:

I am using Microsoft Publisher 2003. I have received the url
information
from my hosting service to create a new network place. Everytime
I
type my
http protocol url in the File Name box I get the following error
message:
"Cannot find the url http://jewlery.fatcow.com"

Can someone please help me. I really need to get the web page
form
to
work
as soon as possible.

 

[David Bartosik [MSFT MVP]]

Did you upload the web site using the HTTP instructions?

David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com

They have reinstalled the fpse. But the form is still not working.

Install/reinstalling the fpse takes like 10 seconds dunno why they would
be
reluctant to push a button for you.

I have spoken to my web host service about reinstalling FPSE. However
they
were a little reluctant about doing this and said they would get back
to
me
in 24 to 48 hours. In case they will not do this I noticed in your
trouble
shooting area you can setup forms without using FTP or FPSE by clicking
on
use the ISP in the form property. If I go this route can I use it if I
have
published my site using FTP. Just trying to find out what my options
are
if
my web host service does not reinstall FPSE. I have paid for this
service
for a year and do not want to lose my money. I am using a trial
version
of
Microsoft Publisher 2003 and want this problem resolved before I make
the
decision to purchase the full version.

:

I browsed to http://jewlery.fatcow.com/_vti_inf.html and thus
confirmed
that FPSE is installed on your web space. If you read the FAQ
http://www.publishermvps.com/Default.aspx?tabid=30 and the uploading
trouble
shooting article you'd have learned that FTP usage on FPSE can break
FPSE.
Your next course of action is to tell the host to reinstall FPSE. When
they
have that completed then follow my http publishing article.

David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com

The site is published through FTP. I need to publish it using http
so
my
contact
form will send me the data entered by my contacts. I am unable to
create
a
http
protocol. I keep getting the error messages : ""Cannot find the url
http://jewlery.fatcow.com" I know the url works because it works in
the
browser. I have followed microsoft's instructions on how to create
the
http
protocol in the network place but I am still unable to create the
protocol.


:

I see the site is published. Is this still a valid issue? If so
please
work
thru http://www.publishermvps.com/Default.aspx?tabid=158

--
David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com



:

I am using Microsoft Publisher 2003. I have received the url
information
from my hosting service to create a new network place. Everytime
I
type my
http protocol url in the File Name box I get the following error
message:
"Cannot find the url http://jewlery.fatcow.com"

Can someone please help me. I really need to get the web page
form
to
work
as soon as possible.

 

[jewlery]

My hosting service and I have tried several times to upload my site using
your http instructions but we are unable to do so. We keep getting the error
message cannot find the url. But when we type the url in the internet
browser window it works.

Did you upload the web site using the HTTP instructions?

David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com

They have reinstalled the fpse. But the form is still not working.

Install/reinstalling the fpse takes like 10 seconds dunno why they would
be
reluctant to push a button for you.


I have spoken to my web host service about reinstalling FPSE. However
they
were a little reluctant about doing this and said they would get back
to
me
in 24 to 48 hours. In case they will not do this I noticed in your
trouble
shooting area you can setup forms without using FTP or FPSE by clicking
on
use the ISP in the form property. If I go this route can I use it if I
have
published my site using FTP. Just trying to find out what my options
are
if
my web host service does not reinstall FPSE. I have paid for this
service
for a year and do not want to lose my money. I am using a trial
version
of
Microsoft Publisher 2003 and want this problem resolved before I make
the
decision to purchase the full version.

:

I browsed to http://jewlery.fatcow.com/_vti_inf.html and thus
confirmed
that FPSE is installed on your web space. If you read the FAQ
http://www.publishermvps.com/Default.aspx?tabid=30 and the uploading
trouble
shooting article you'd have learned that FTP usage on FPSE can break
FPSE.
Your next course of action is to tell the host to reinstall FPSE. When
they
have that completed then follow my http publishing article.

David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com

The site is published through FTP. I need to publish it using http
so
my
contact
form will send me the data entered by my contacts. I am unable to
create
a
http
protocol. I keep getting the error messages : ""Cannot find the url
http://jewlery.fatcow.com" I know the url works because it works in
the
browser. I have followed microsoft's instructions on how to create
the
http
protocol in the network place but I am still unable to create the
protocol.


:

I see the site is published. Is this still a valid issue? If so
please
work
thru http://www.publishermvps.com/Default.aspx?tabid=158

--
David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com



:

I am using Microsoft Publisher 2003. I have received the url
information
from my hosting service to create a new network place. Everytime
I
type my
http protocol url in the File Name box I get the following error
message:
"Cannot find the url http://jewlery.fatcow.com"

Can someone please help me. I really need to get the web page
form
to
work
as soon as possible.

 

[David Bartosik [MSFT MVP]]

My hosting service and I have tried several times to upload my site using

your http instructions but we are unable to do so. We keep getting the
error
message cannot find the url. But when we type the url in the internet
browser window it works.

Are we going in circles? Anyway, so now it's clear that you have not
published in HTTP. That is why your form doesn't submit. Totally covered on
the FAQ page - http://www.publishermvps.com/Default.aspx?tabid=30

But you have an issue with HTTP publishing. On that, looking at that error
and your particular URL, my conclusion is that your web space and/or the FP
extensions have not been correctly configured on the web server by an
apparently inexperienced host provider.

Rather than own a domain ( i.e. www.davidbartosik.com ), your web space is a
sub-domain on someone else's (fatcow.com) domain. Usually with a sub-domain
address - subdomainname.domainname.com - you publish to the URL of the
directory, not to the sub-domain URL -
www.domainname.com/mysubdomainfolder/ - when using FPSE publishing (HTTP).

So they need to either give you a different URL for HTTP publishing, or they
need to get the configuration right. That's my call on it.

David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com

 

[jewlery]

My form is finally working. Thanks for all of your help. I am retrieving
my data using the "Use a program from my ISP" method.

My hosting service and I have tried several times to upload my site using
your http instructions but we are unable to do so. We keep getting the
error
message cannot find the url. But when we type the url in the internet
browser window it works.

Are we going in circles? Anyway, so now it's clear that you have not
published in HTTP. That is why your form doesn't submit. Totally covered on
the FAQ page - http://www.publishermvps.com/Default.aspx?tabid=30

But you have an issue with HTTP publishing. On that, looking at that error
and your particular URL, my conclusion is that your web space and/or the FP
extensions have not been correctly configured on the web server by an
apparently inexperienced host provider.

Rather than own a domain ( i.e. www.davidbartosik.com ), your web space is a
sub-domain on someone else's (fatcow.com) domain. Usually with a sub-domain
address - subdomainname.domainname.com - you publish to the URL of the
directory, not to the sub-domain URL -
www.domainname.com/mysubdomainfolder/ - when using FPSE publishing (HTTP).

So they need to either give you a different URL for HTTP publishing, or they
need to get the configuration right. That's my call on it.

David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com

 

[Rob Giordano \(Crash\)]

The problem now is that your confirmation page is outside your domain and
with no easy way home or back.

My form is finally working. Thanks for all of your help. I am retrieving
my data using the "Use a program from my ISP" method.

My hosting service and I have tried several times to upload my site
using
your http instructions but we are unable to do so. We keep getting the
error
message cannot find the url. But when we type the url in the internet
browser window it works.

Are we going in circles? Anyway, so now it's clear that you have not
published in HTTP. That is why your form doesn't submit. Totally covered
on
the FAQ page - http://www.publishermvps.com/Default.aspx?tabid=30

But you have an issue with HTTP publishing. On that, looking at that
error
and your particular URL, my conclusion is that your web space and/or the
FP
extensions have not been correctly configured on the web server by an
apparently inexperienced host provider.

Rather than own a domain ( i.e. www.davidbartosik.com ), your web space
is a
sub-domain on someone else's (fatcow.com) domain. Usually with a
sub-domain
address - subdomainname.domainname.com - you publish to the URL of the
directory, not to the sub-domain URL -
www.domainname.com/mysubdomainfolder/ - when using FPSE publishing
(HTTP).

So they need to either give you a different URL for HTTP publishing, or
they
need to get the configuration right. That's my call on it.

David Bartosik - [MSFT MVP]
http://www.publishermvps.com
http://www.davidbartosik.com