Word wont 'select addresses form an Outlook contacts folder' ???

A

akm

Trying to print addresses on envelopes from word with outlook contacts folder.

When try to pick "outlook contacts folder" as a word recipients source, get
error message "unable to obtain list of tables from data source", so assume
need to set up the data source from the outlook .pab file.

When try to pick outlook .pab file as 'data source' for outlook to word mail
merge, get "internal mapi error: the object does not support the
getcontentstable method. contact your administrator".

Is there a good word/outlook mail merge instructions site that covers this
problem ?
 
A

akm

Russ
Thanks for the reply !

Worked well... only question is, when Word asks to select an Outlook folder
it shows only the main contacts folder, and we have several sub-folders that
we want to use individually for contact addresses.

How do we get each one of those to show up on the Word mail merge list of
Outlook contact folders ?

--
Thanks again for your help.
akm (XPpro,SP-2,IE-7,Office2003)




Russ Valentine said:
Outlook has not used PAB file for over a decade. It should not even be on
your radar.
What you need to do is configure your Outlook Address Book Service
correctly:
http://support.microsoft.com/default.aspx?scid=kb;en-us;287563&Product=ol2002
 
R

Russ Valentine [MVP-Outlook]

Did you enable those folders as email address books in their properties?
--
Russ Valentine
[MVP-Outlook]
akm said:
Russ
Thanks for the reply !

Worked well... only question is, when Word asks to select an Outlook
folder
it shows only the main contacts folder, and we have several sub-folders
that
we want to use individually for contact addresses.

How do we get each one of those to show up on the Word mail merge list of
Outlook contact folders ?

--
Thanks again for your help.
akm (XPpro,SP-2,IE-7,Office2003)




Russ Valentine said:
Outlook has not used PAB file for over a decade. It should not even be on
your radar.
What you need to do is configure your Outlook Address Book Service
correctly:
http://support.microsoft.com/default.aspx?scid=kb;en-us;287563&Product=ol2002

--
Russ Valentine
[MVP-Outlook]
akm said:
Trying to print addresses on envelopes from word with outlook contacts
folder.

When try to pick "outlook contacts folder" as a word recipients source,
get
error message "unable to obtain list of tables from data source", so
assume
need to set up the data source from the outlook .pab file.

When try to pick outlook .pab file as 'data source' for outlook to word
mail
merge, get "internal mapi error: the object does not support the
getcontentstable method. contact your administrator".

Is there a good word/outlook mail merge instructions site that covers
this
problem ?
 
A

akm

Thanks, Russ.
Sorry, guess that should have been my question... ie, do I need to go to
each folder and set up for use for mail merge (have got about 20 or them) ?
And, looks like the answer is YES.
Really appreciate your followup !
Have a good one !
--
Thanks again for your help.
akm (XPpro,SP-2,IE-7,Office2003)




Russ Valentine said:
Did you enable those folders as email address books in their properties?
--
Russ Valentine
[MVP-Outlook]



akm said:
Russ
Thanks for the reply !

Worked well... only question is, when Word asks to select an Outlook
folder
it shows only the main contacts folder, and we have several sub-folders
that
we want to use individually for contact addresses.

How do we get each one of those to show up on the Word mail merge list of
Outlook contact folders ?
 
R

Russ Valentine [MVP-Outlook]

For any subfolder to appear in the address book view, it must be enabled as
an "email address book," so you must enable each one. Which begs the
question, is having so many subfolders the best way to organize your
Contacts? If so, fine, but it may not be. There are some drawbacks to doing
so. I'd look this over to see if there might be better ways to group your
contacts, like categories, for example.
http://www.slipstick.com/contacts/oloabcat.htm

--
Russ Valentine
[MVP-Outlook]
akm said:
Thanks, Russ.
Sorry, guess that should have been my question... ie, do I need to go to
each folder and set up for use for mail merge (have got about 20 or them)
?
And, looks like the answer is YES.
Really appreciate your followup !
Have a good one !
--
Thanks again for your help.
akm (XPpro,SP-2,IE-7,Office2003)




Russ Valentine said:
Did you enable those folders as email address books in their properties?
--
Russ Valentine
[MVP-Outlook]



akm said:
Russ
Thanks for the reply !

Worked well... only question is, when Word asks to select an Outlook
folder
it shows only the main contacts folder, and we have several sub-folders
that
we want to use individually for contact addresses.

How do we get each one of those to show up on the Word mail merge list
of
Outlook contact folders ?

--
Thanks again for your help.
akm (XPpro,SP-2,IE-7,Office2003)




:

Outlook has not used PAB file for over a decade. It should not even be
on
your radar.
What you need to do is configure your Outlook Address Book Service
correctly:
http://support.microsoft.com/default.aspx?scid=kb;en-us;287563&Product=ol2002


Trying to print addresses on envelopes from word with outlook
contacts
folder.

When try to pick "outlook contacts folder" as a word recipients
source,
get
error message "unable to obtain list of tables from data source", so
assume
need to set up the data source from the outlook .pab file.

When try to pick outlook .pab file as 'data source' for outlook to
word
mail
merge, get "internal mapi error: the object does not support the
getcontentstable method. contact your administrator".

Is there a good word/outlook mail merge instructions site that
covers
this
problem ?
 
A

akm

Russ
Thanks for the suggestion !
Will look at 'categories'.
Was thinking of using folders to keep track of mailings done and those yet
to do.
Maybe need to enter date/s in some contact field/s for that type of tracking
process, ie for multiple mailings for different contacts at different times ?
Can see where folders could get complicated for that process.
Thoughts ?
--
Thanks again for your help.
akm (XPpro,SP-2,IE-7,Office2003)




Russ Valentine said:
For any subfolder to appear in the address book view, it must be enabled as
an "email address book," so you must enable each one. Which begs the
question, is having so many subfolders the best way to organize your
Contacts? If so, fine, but it may not be. There are some drawbacks to doing
so. I'd look this over to see if there might be better ways to group your
contacts, like categories, for example.
http://www.slipstick.com/contacts/oloabcat.htm

--
Russ Valentine
[MVP-Outlook]



akm said:
Thanks, Russ.
Sorry, guess that should have been my question... ie, do I need to go to
each folder and set up for use for mail merge (have got about 20 or them)
?
And, looks like the answer is YES.
Really appreciate your followup !
Have a good one !
--
Thanks again for your help.
akm (XPpro,SP-2,IE-7,Office2003)




Russ Valentine said:
Did you enable those folders as email address books in their properties?
--
Russ Valentine
[MVP-Outlook]



Russ
Thanks for the reply !

Worked well... only question is, when Word asks to select an Outlook
folder
it shows only the main contacts folder, and we have several sub-folders
that
we want to use individually for contact addresses.

How do we get each one of those to show up on the Word mail merge list
of
Outlook contact folders ?

--
Thanks again for your help.
akm (XPpro,SP-2,IE-7,Office2003)




:

Outlook has not used PAB file for over a decade. It should not even be
on
your radar.
What you need to do is configure your Outlook Address Book Service
correctly:
http://support.microsoft.com/default.aspx?scid=kb;en-us;287563&Product=ol2002

--
Russ Valentine
[MVP-Outlook]



Trying to print addresses on envelopes from word with outlook
contacts
folder.

When try to pick "outlook contacts folder" as a word recipients
source,
get
error message "unable to obtain list of tables from data source", so
assume
need to set up the data source from the outlook .pab file.

When try to pick outlook .pab file as 'data source' for outlook to
word
mail
merge, get "internal mapi error: the object does not support the
getcontentstable method. contact your administrator".

Is there a good word/outlook mail merge instructions site that
covers
this
problem ?
 
S

Sue Mosher [MVP]

Another option is to start the merge from Outlook, not Word, in the folder
from which you want to create the envelopes.
--
Sue Mosher, Outlook MVP
Author of Microsoft Outlook 2007 Programming:
Jumpstart for Power Users and Administrators
http://www.outlookcode.com/article.aspx?id=54

akm said:
Thanks, Russ.
Sorry, guess that should have been my question... ie, do I need to go to
each folder and set up for use for mail merge (have got about 20 or them) ?
And, looks like the answer is YES.
Really appreciate your followup !
Have a good one !
--
Thanks again for your help.
akm (XPpro,SP-2,IE-7,Office2003)




Russ Valentine said:
Did you enable those folders as email address books in their properties?
--
Russ Valentine
[MVP-Outlook]



akm said:
Russ
Thanks for the reply !

Worked well... only question is, when Word asks to select an Outlook
folder
it shows only the main contacts folder, and we have several sub-folders
that
we want to use individually for contact addresses.

How do we get each one of those to show up on the Word mail merge list of
Outlook contact folders ?

--
Thanks again for your help.
akm (XPpro,SP-2,IE-7,Office2003)




:

Outlook has not used PAB file for over a decade. It should not even be on
your radar.
What you need to do is configure your Outlook Address Book Service
correctly:
http://support.microsoft.com/default.aspx?scid=kb;en-us;287563&Product=ol2002


Trying to print addresses on envelopes from word with outlook contacts
folder.

When try to pick "outlook contacts folder" as a word recipients source,
get
error message "unable to obtain list of tables from data source", so
assume
need to set up the data source from the outlook .pab file.

When try to pick outlook .pab file as 'data source' for outlook to word
mail
merge, get "internal mapi error: the object does not support the
getcontentstable method. contact your administrator".

Is there a good word/outlook mail merge instructions site that covers
this
problem ?
 
A

akm

Good point !
Will take a look at that option.
--
Thanks again for your help !
akm (XPpro,SP-2,IE-7,Office2003)




Sue Mosher said:
Another option is to start the merge from Outlook, not Word, in the folder
from which you want to create the envelopes.
--
Sue Mosher, Outlook MVP
Author of Microsoft Outlook 2007 Programming:
Jumpstart for Power Users and Administrators
http://www.outlookcode.com/article.aspx?id=54



akm said:
Thanks, Russ.
Sorry, guess that should have been my question... ie, do I need to go to
each folder and set up for use for mail merge (have got about 20 or them) ?
And, looks like the answer is YES.
Really appreciate your followup !
Have a good one !
--
Thanks again for your help.
akm (XPpro,SP-2,IE-7,Office2003)




Russ Valentine said:
Did you enable those folders as email address books in their properties?
--
Russ Valentine
[MVP-Outlook]



Russ
Thanks for the reply !

Worked well... only question is, when Word asks to select an Outlook
folder
it shows only the main contacts folder, and we have several sub-folders
that
we want to use individually for contact addresses.

How do we get each one of those to show up on the Word mail merge list of
Outlook contact folders ?

--
Thanks again for your help.
akm (XPpro,SP-2,IE-7,Office2003)




:

Outlook has not used PAB file for over a decade. It should not even be on
your radar.
What you need to do is configure your Outlook Address Book Service
correctly:
http://support.microsoft.com/default.aspx?scid=kb;en-us;287563&Product=ol2002

--
Russ Valentine
[MVP-Outlook]



Trying to print addresses on envelopes from word with outlook contacts
folder.

When try to pick "outlook contacts folder" as a word recipients source,
get
error message "unable to obtain list of tables from data source", so
assume
need to set up the data source from the outlook .pab file.

When try to pick outlook .pab file as 'data source' for outlook to word
mail
merge, get "internal mapi error: the object does not support the
getcontentstable method. contact your administrator".

Is there a good word/outlook mail merge instructions site that covers
this
problem ?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top