Removing Command Button

[Dave Peterson]

Just to add to Chip's response:

You could run the auto_close procedure this way:

Option Explicit
Sub Macro()

'your code to do the checking

'then close it
With ThisWorkbook
.RunAutoMacros which:=xlAutoClose
.Close savechanges:=False
End With
End Sub
Sub auto_Close()
MsgBox "auto_close"
'clean up the toolbar
End Sub

Dave,

I inserted a msgbox at the beginning and ending of Auto_Close, and none of
the message boxes showed up. Apparently, the code in Auto_Close did not get
executed.

Below is the structure of my "Macro" (one of the 3 subs, besides Autpen
and Auto_Close) sub:

Private Sub Macro()

Dim PROMPT As String

PROMPT = Msgbox(PROMPT:="Message", Buttons:=vbYesNo + vbQuestion,
Title:="Macro Title")

If PROMPT = vbNo Then
MsgBox "The macro is terminated.",vbInformation,"Macro Title"

Else
'The code to execute

End If

Workbooks("Excel Macro File.xls").Close False

End Sub

I know that the "Excel Macro File.xls" closes because I tested by adding a
msgbox right above the Workbooks("Excel Macro File.xls").Close False code.
Somehow, the code in Auto_Close is completely ignored.

By looking at the structure of Macro sub from above, can you think of any
reason that would triggle not to read the the code in Auto_Close?

In addition to the testing from above, I also did another testing. I added
the code in Auto_Close as part of "Macro" sub, and the code was added right
before "Workbooks("Excel Macro File.xls").Close False". When I executed the
"Macro" code, the Excel window just froze.

Am I doing something wrong?

Thank you again very much for continuing to help me.

So when you added the msgbox to the auto_close procedure, did you see it when
the macro workbook closed?

Are you positive that you used the same tag in both the Autpen and Auto_Close
procedures. Yeah, I know that you posted code that was correct. But sometimes
what's posted can be changed (ever so slightly).

Dave,

First of all, all 3 subs are in general module.

Secondly, I followed your steps from your last post, and I did not see the
button on the Excel file (that I execute the macro on) after I closed and
reopened.

However, I do still see the button in the following situation.

I open the Excel file ("Excel Data File") for which I want to execute my
macro on. Then I open the macro file in the same Excel window, and the
button is created on the Standard toolbar after the macro file is opened. I
click on the button to run the macro, and the macro executes the code. After
the macro finishes with the execution, the macro file closes, and the "Excel
Data File" and the Excel window still open. At that time, the button should
remove/delete from the Standard toolbar, but it's not.

That is where I have a problem with.

Thank you very much for your patience and continuing to help me.

:

That code worked perfectly fine for me.

After you close the workbook, clean up that toolbar manually -- just to make
sure there's nothing wrong to start.

Then load your workbook with the macros.

Do you see the new button?

Close the workbook.

Did the button disappear?

ps.

Add a msgbox to the top of each procedure:

msgbox "Autpen running"
and
msgbox "Auto_Close running"

Just to make sure that both are running when they should. (You do have them in
a General module, right? They don't belong in the ThisWorkbook module or behind
a worksheet.)

Accesshelp wrote:

Dave,

As you instructed, I used Chip's code in both Autpen and Auto_Close, and
when I tried it, the button is still on the Standard toolbar after the macro
file closes.

The followings are the code that I have in Autpen and Auto_Close,
respectively:

Private Sub Autpen()

Dim nBar As Variant
Dim nCon As Variant

Set nBar = CommandBars("Standard")
nBar.Visible = True
Set nCon = nBar.Controls.Add(Type:=msoControlButton, Temporary:=True)
With nCon
.BeginGroup = True
.Style = msoButtonCaption
.Caption = "Macro"
.OnAction = "RunMacro"
.Tag = "MacroTag"
End With

End Sub

Private Sub Auto_Close()

Dim C As Office.CommandBarControl
On Error Resume Next
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Do Until C Is Nothing
C.Delete
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Loop

End Sub

I do not have duplicate command buttons. There is only one button.

Thanks.

:

If you used Chip's code to add the commandbutton, then use Chip's code to delete
it.

Any chance you had multiple buttons on that Standard toolbar and you deleted
just one of them?

If that's the case, then delete the others manually (see the previous message)
before you start testing again.

Accesshelp wrote:

Good morning Dave,

Thanks for continuing to help me.

In the general module, I inserted the following code, and the command button
is still on the Standard toolbar when the macro file is closed.

Private Sub Auto_Close()
Application.CommandBars("Standard").Controls("Macro").Delete
End Sub

"Macro" is the name (and caption) of command button.

Did I miss something? Please help. Thanks.

:

It could be as simple as the name of your macro that you want to run when you
close that workbook.

If your procedure is in the ThisWorkbook module, it should look like:
Private Sub Workbook_BeforeClose(Cancel As Boolean)

(there is no workbook_Close event that fires automatically.)

If the procedure is in a General module, then it should look like:
Sub Auto_Close()

====
You could test your code by running that workbook_close procedure yourself (but
remember, excel won't run it automatically!).

Accesshelp wrote:

Dave,

Thanks for your response.

Basically, I have an Excel file that is just dedicated for a macro, and the
Excel macro file will be used by users. The users will open the macro file
in the same window as an Excel file where the macro will execute the code.
The way I have designed is when the user opens the macro file, the macro file
will create the command button and will be hidden. When the user clicks on
the command button, the macro will execute its code. After the macro is
executed, the macro file will be closed, and the command button will remove
from the Standard toolbar. If the user does not click on the button and when
the Excel window is closed, the macro file will be closed and the button will
remove from the Standard toolbar.

The problem that I am having now is the button would not remove from the
toolbar.

In my Excel macro file, I have 3 Subs: Autpen, RunMacro and
Workbook_Close. The only code that I have in Autpen is a code to create
the command button "Macro" on the Standard toolbar, and the only code that I
would like to have in Workbook_Close is a code to remove the button from the
toolbar when the macro file closes.

As far as Runmacro, I use .OnAction = "RunMacro" in Autpen. When the
user clicks on the command button, OnAction calls up the RunMacro Sub and
executes the code in that Sub. At the end of RunMacro, I have a code to
close the macro Excel file.

I tried to use the code from Chip in Workbook_Close, and it did not remove
the button and did not seem to do anything.

I am sorry about the long message. I hope I have covered what you are
looking for.

What do you think I should do now?

Thanks.

:

I think it's time to share the code you used.

Did you create a separate sub to delete the control with that tag?
If yes, how did you run it?
And did you spell that Tag the same way in both routines?

Are you sure you're not looking at the control that was left over from previous
testing -- that one didn't have a tag.

I'd just delete it manually.

Inside excel:
Tools|Customize (just to see that dialog)
drag the offending control off the toolbar.



Accesshelp wrote:

Chip,

Thanks for the code.

I inserted a line for Tag in my Autpen sub and inserted the code to
delete the command button in my Workbook_Close sub. When I tried it, the
button did not delete from the Standard toolbar.

I am sure whether I did something wrong.

Thanks.

:

Try identifying the control with a Tag parameter:

With nCon
.BeginGroup = True
.Style = msoButtonCaption
.Caption = "Macro"
.OnAction = "RunMacro"
.Tag = "MyTag" '<<<< ADDED
End With

The text "MyTag" can be anything you want. Then, to delete the
controls, use

Dim C As Office.CommandBarControl
On Error Resume Next
Set C = Application.CommandBars.FindControl(Tag:="MyTag")
Do Until C Is Nothing
C.Delete
Set C = Application.CommandBars.FindControl(Tag:="MyTag")
Loop

This will delete all controls whose Tag property is "MyTag".

Cordially,
Chip Pearson
Microsoft MVP 1998 - 2010
Pearson Software Consulting, LLC
www.cpearson.com
[email on web site]





On Wed, 5 May 2010 11:57:01 -0700, Accesshelp

Hello all,

I have a code that creates a command button when the Excel file opens. The
following is the code that I use:

Set nBar = CommandBars("Standard")
nBar.Visible = True
Set nCon = nBar.Controls.Add(Type:=msoControlButton, Temporary:=True)
With nCon
.BeginGroup = True
.Style = msoButtonCaption
.Caption = "Macro"
.OnAction = "RunMacro"
End With

What I would like to do is to remove the above command button "Macro" when
the Excel file closes. I have tried to use the following code, and it did
not work.

Application.CommandBars("Standard").Controls("Macro").Delete

Please help. Thanks.
.

 

[Accesshelp]

Good morning Chip,

Thank you very much for your patience and continuing to help me.

I changed my sub procedure to "Workbook_BeforeClose" from "Auto_Close".
When I tested it, somehow, the code in the Workbook_BeforeClose is not
executed. Therefore, the button is still not deleted from the Standard
toolbar.

Am I doing something wrong?

Below please find the 3 sub procedures that I current have and have tested
on, and all 3 subs are in General Module. Should the Workbook_BeforeClose in
ThisWorkbook?

Please take a look up all 3 procedures to see where I did wrong. Thanks
again.

Private Sub Autpen()

Dim nBar As Variant
Dim nCon As Variant

Workbooks ("Excel Macro File.xls").Windows(1).Visible = False

Set nBar = CommandBars("Standard")
nBar.Visible = True
Set nCon = nBar.Controls.Add(Type:=msoControlButton, Temporary:=True)
With nCon
.BeginGroup = True
.Style = msoButtonCaption
.Caption = "Macro"
.OnAction = "RunMacro"
.Tag = "MacroTag"
End With

End Sub


Private Sub Workbook_BeforeClose()

Dim C As Office.CommandBarControl
On Error Resume Next
MsgBox "Can you see this message?", vbCritical, "Can you see me now?"
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Do Until C Is Nothing
C.Delete
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Loop

MsgBox "Goodbye....", vbInformation, "Exiting...."

End Sub

Private Sub Macro()

Dim PROMPT As String

PROMPT = Msgbox(PROMPT:="Message", Buttons:=vbYesNo + vbQuestion,
Title:="Macro Title")

If PROMPT = vbNo Then
MsgBox "The macro is terminated.",vbInformation,"Macro Title"

Else
'The code to execute

End If

Workbooks("Excel Macro File.xls").Close False

End Sub

When working with Autpen and Auto_Close, keep in mind that these
procedures are NOT called when the workbook is opened or closed with
code. For example,

Sub AAA()
Workbooks.Open "C:\Book1.xls"
End Sub

With this code, the Autpen procedure in Book1.xls will not run.
Similarly,

Sub BBB()
Workbooks("Book1.xls").Close
End Sub

Here, the Auto_Close procedure in Book1.xls will not run.

However, the Workbook_Open and Workbook_BeforeClose procedures do run
when a file is opened or closed via code.

Cordially,
Chip Pearson
Microsoft MVP 1998 - 2010
Pearson Software Consulting, LLC
www.cpearson.com
[email on web site]

Dave,

I inserted a msgbox at the beginning and ending of Auto_Close, and none of
the message boxes showed up. Apparently, the code in Auto_Close did not get
executed.

Below is the structure of my "Macro" (one of the 3 subs, besides Autpen
and Auto_Close) sub:

Private Sub Macro()

Dim PROMPT As String

PROMPT = Msgbox(PROMPT:="Message", Buttons:=vbYesNo + vbQuestion,
Title:="Macro Title")

If PROMPT = vbNo Then
MsgBox "The macro is terminated.",vbInformation,"Macro Title"

Else
'The code to execute

End If

Workbooks("Excel Macro File.xls").Close False

End Sub


I know that the "Excel Macro File.xls" closes because I tested by adding a
msgbox right above the Workbooks("Excel Macro File.xls").Close False code.
Somehow, the code in Auto_Close is completely ignored.

By looking at the structure of Macro sub from above, can you think of any
reason that would triggle not to read the the code in Auto_Close?

In addition to the testing from above, I also did another testing. I added
the code in Auto_Close as part of "Macro" sub, and the code was added right
before "Workbooks("Excel Macro File.xls").Close False". When I executed the
"Macro" code, the Excel window just froze.

Am I doing something wrong?

Thank you again very much for continuing to help me.

 

[Accesshelp]

Good morning Dave,

As you instructed, I added the following code to the Macro sub (instead of
after 'Workbooks("Excel Macro File.xls").Close False', I added before).

With ThisWorkbook
.RunAutoMacros which:=xlAutoClose
.Close savechanges:=False
End With


The code in Auto_Close did execute, but Excel just froze at the step of
deleting the button.

Do you know why?

Thanks.

 

[Chip Pearson]

on, and all 3 subs are in General Module. Should the Workbook_BeforeClose in
ThisWorkbook?

The Workbook_Open and Workbook_BeforeClose procedures MUST reside in
the ThisWorkbook code module, not a regular code module. For any
event, VBA looks for code only in the object module attached to the
object that triggers the event. Therefore, all Workbook_* events must
be in ThisWorkbook, and all Worksheet_* events must be in the
appropriate Sheet's code module. If the event code is elsewhere, VBA
will not find it and thus not execute it. See
http://www.cpearson.com/Excel/Events.aspx for much more info about
events.

If you want, you can email me the workbook and I'll have a look at it.
Cordially,
Chip Pearson
Microsoft MVP 1998 - 2010
Pearson Software Consulting, LLC
www.cpearson.com
(e-mail address removed)

Good morning Chip,

Thank you very much for your patience and continuing to help me.

I changed my sub procedure to "Workbook_BeforeClose" from "Auto_Close".
When I tested it, somehow, the code in the Workbook_BeforeClose is not
executed. Therefore, the button is still not deleted from the Standard
toolbar.

Am I doing something wrong?

Below please find the 3 sub procedures that I current have and have tested
on, and all 3 subs are in General Module. Should the Workbook_BeforeClose in
ThisWorkbook?

Please take a look up all 3 procedures to see where I did wrong. Thanks
again.

Private Sub Autpen()

Dim nBar As Variant
Dim nCon As Variant

Workbooks ("Excel Macro File.xls").Windows(1).Visible = False

Set nBar = CommandBars("Standard")
nBar.Visible = True
Set nCon = nBar.Controls.Add(Type:=msoControlButton, Temporary:=True)
With nCon
.BeginGroup = True
.Style = msoButtonCaption
.Caption = "Macro"
.OnAction = "RunMacro"
.Tag = "MacroTag"
End With

End Sub


Private Sub Workbook_BeforeClose()

Dim C As Office.CommandBarControl
On Error Resume Next
MsgBox "Can you see this message?", vbCritical, "Can you see me now?"
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Do Until C Is Nothing
C.Delete
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Loop

MsgBox "Goodbye....", vbInformation, "Exiting...."

End Sub

Private Sub Macro()

Dim PROMPT As String

PROMPT = Msgbox(PROMPT:="Message", Buttons:=vbYesNo + vbQuestion,
Title:="Macro Title")

If PROMPT = vbNo Then
MsgBox "The macro is terminated.",vbInformation,"Macro Title"

Else
'The code to execute

End If

Workbooks("Excel Macro File.xls").Close False

End Sub

When working with Autpen and Auto_Close, keep in mind that these
procedures are NOT called when the workbook is opened or closed with
code. For example,

Sub AAA()
Workbooks.Open "C:\Book1.xls"
End Sub

With this code, the Autpen procedure in Book1.xls will not run.
Similarly,

Sub BBB()
Workbooks("Book1.xls").Close
End Sub

Here, the Auto_Close procedure in Book1.xls will not run.

However, the Workbook_Open and Workbook_BeforeClose procedures do run
when a file is opened or closed via code.

Cordially,
Chip Pearson
Microsoft MVP 1998 - 2010
Pearson Software Consulting, LLC
www.cpearson.com
[email on web site]

Dave,

I inserted a msgbox at the beginning and ending of Auto_Close, and none of
the message boxes showed up. Apparently, the code in Auto_Close did not get
executed.

Below is the structure of my "Macro" (one of the 3 subs, besides Autpen
and Auto_Close) sub:

Private Sub Macro()

Dim PROMPT As String

PROMPT = Msgbox(PROMPT:="Message", Buttons:=vbYesNo + vbQuestion,
Title:="Macro Title")

If PROMPT = vbNo Then
MsgBox "The macro is terminated.",vbInformation,"Macro Title"

Else
'The code to execute

End If

Workbooks("Excel Macro File.xls").Close False

End Sub


I know that the "Excel Macro File.xls" closes because I tested by adding a
msgbox right above the Workbooks("Excel Macro File.xls").Close False code.
Somehow, the code in Auto_Close is completely ignored.

By looking at the structure of Macro sub from above, can you think of any
reason that would triggle not to read the the code in Auto_Close?

In addition to the testing from above, I also did another testing. I added
the code in Auto_Close as part of "Macro" sub, and the code was added right
before "Workbooks("Excel Macro File.xls").Close False". When I executed the
"Macro" code, the Excel window just froze.

Am I doing something wrong?

Thank you again very much for continuing to help me.




:

So when you added the msgbox to the auto_close procedure, did you see it when
the macro workbook closed?

Are you positive that you used the same tag in both the Autpen and Auto_Close
procedures. Yeah, I know that you posted code that was correct. But sometimes
what's posted can be changed (ever so slightly).



Accesshelp wrote:

Dave,

First of all, all 3 subs are in general module.

Secondly, I followed your steps from your last post, and I did not see the
button on the Excel file (that I execute the macro on) after I closed and
reopened.

However, I do still see the button in the following situation.

I open the Excel file ("Excel Data File") for which I want to execute my
macro on. Then I open the macro file in the same Excel window, and the
button is created on the Standard toolbar after the macro file is opened. I
click on the button to run the macro, and the macro executes the code. After
the macro finishes with the execution, the macro file closes, and the "Excel
Data File" and the Excel window still open. At that time, the button should
remove/delete from the Standard toolbar, but it's not.

That is where I have a problem with.

Thank you very much for your patience and continuing to help me.

:

That code worked perfectly fine for me.

After you close the workbook, clean up that toolbar manually -- just to make
sure there's nothing wrong to start.

Then load your workbook with the macros.

Do you see the new button?

Close the workbook.

Did the button disappear?

ps.

Add a msgbox to the top of each procedure:

msgbox "Autpen running"
and
msgbox "Auto_Close running"

Just to make sure that both are running when they should. (You do have them in
a General module, right? They don't belong in the ThisWorkbook module or behind
a worksheet.)

Accesshelp wrote:

Dave,

As you instructed, I used Chip's code in both Autpen and Auto_Close, and
when I tried it, the button is still on the Standard toolbar after the macro
file closes.

The followings are the code that I have in Autpen and Auto_Close,
respectively:

Private Sub Autpen()

Dim nBar As Variant
Dim nCon As Variant

Set nBar = CommandBars("Standard")
nBar.Visible = True
Set nCon = nBar.Controls.Add(Type:=msoControlButton, Temporary:=True)
With nCon
.BeginGroup = True
.Style = msoButtonCaption
.Caption = "Macro"
.OnAction = "RunMacro"
.Tag = "MacroTag"
End With

End Sub

Private Sub Auto_Close()

Dim C As Office.CommandBarControl
On Error Resume Next
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Do Until C Is Nothing
C.Delete
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Loop

End Sub

I do not have duplicate command buttons. There is only one button.

Thanks.

:

If you used Chip's code to add the commandbutton, then use Chip's code to delete
it.

Any chance you had multiple buttons on that Standard toolbar and you deleted
just one of them?

If that's the case, then delete the others manually (see the previous message)
before you start testing again.

Accesshelp wrote:

Good morning Dave,

Thanks for continuing to help me.

In the general module, I inserted the following code, and the command button
is still on the Standard toolbar when the macro file is closed.

Private Sub Auto_Close()
Application.CommandBars("Standard").Controls("Macro").Delete
End Sub

"Macro" is the name (and caption) of command button.

Did I miss something? Please help. Thanks.

:

It could be as simple as the name of your macro that you want to run when you
close that workbook.

If your procedure is in the ThisWorkbook module, it should look like:
Private Sub Workbook_BeforeClose(Cancel As Boolean)

(there is no workbook_Close event that fires automatically.)

If the procedure is in a General module, then it should look like:
Sub Auto_Close()

====
You could test your code by running that workbook_close procedure yourself (but
remember, excel won't run it automatically!).

Accesshelp wrote:

Dave,

Thanks for your response.

Basically, I have an Excel file that is just dedicated for a macro, and the
Excel macro file will be used by users. The users will open the macro file
in the same window as an Excel file where the macro will execute the code.
The way I have designed is when the user opens the macro file, the macro file
will create the command button and will be hidden. When the user clicks on
the command button, the macro will execute its code. After the macro is
executed, the macro file will be closed, and the command button will remove
from the Standard toolbar. If the user does not click on the button and when
the Excel window is closed, the macro file will be closed and the button will
remove from the Standard toolbar.

The problem that I am having now is the button would not remove from the
toolbar.

In my Excel macro file, I have 3 Subs: Autpen, RunMacro and
Workbook_Close. The only code that I have in Autpen is a code to create
the command button "Macro" on the Standard toolbar, and the only code that I
would like to have in Workbook_Close is a code to remove the button from the
toolbar when the macro file closes.

As far as Runmacro, I use .OnAction = "RunMacro" in Autpen. When the
user clicks on the command button, OnAction calls up the RunMacro Sub and
executes the code in that Sub. At the end of RunMacro, I have a code to
close the macro Excel file.

I tried to use the code from Chip in Workbook_Close, and it did not remove
the button and did not seem to do anything.

I am sorry about the long message. I hope I have covered what you are
looking for.

What do you think I should do now?

Thanks.

:

I think it's time to share the code you used.

Did you create a separate sub to delete the control with that tag?
If yes, how did you run it?
And did you spell that Tag the same way in both routines?

Are you sure you're not looking at the control that was left over from previous
testing -- that one didn't have a tag.

I'd just delete it manually.

Inside excel:
Tools|Customize (just to see that dialog)
drag the offending control off the toolbar.



Accesshelp wrote:

Chip,

Thanks for the code.

 

[Dave Peterson]

I don't have a guess if you don't share your current version of the code.

 

[Accesshelp]

Chip,

Thanks for providing the information on Workbook_***, and please excuse my
lack of knowledge in the area.

Now I have the following code in ThisWorkbook:

Private Sub Workbook_BeforeClose()

Dim C As Office.CommandBarControl
On Error Resume Next
MsgBox "Can you see this message?", vbCritical, "Can you see me now?"
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Do Until C Is Nothing
C.Delete
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Loop

MsgBox "Goodbye....", vbInformation, "Exiting...."

End Sub

The problem that I am having now is if I press F5 (Run Sub/User Form) in
VBAProject on "Macro" sub, the code in Workbook_BeforeClose executes, and the
button gets deleted from the Standard toolbar. On the other hand, if I press
the command button on the toolbar, macro executes the code all the way
through to the code to delete the button, and the Excel window freezes/hangs,
and the button does not get deleted. I have to manually close the Excel
window.

Thanks.

on, and all 3 subs are in General Module. Should the Workbook_BeforeClose in
ThisWorkbook?

The Workbook_Open and Workbook_BeforeClose procedures MUST reside in
the ThisWorkbook code module, not a regular code module. For any
event, VBA looks for code only in the object module attached to the
object that triggers the event. Therefore, all Workbook_* events must
be in ThisWorkbook, and all Worksheet_* events must be in the
appropriate Sheet's code module. If the event code is elsewhere, VBA
will not find it and thus not execute it. See
http://www.cpearson.com/Excel/Events.aspx for much more info about
events.

If you want, you can email me the workbook and I'll have a look at it.
Cordially,
Chip Pearson
Microsoft MVP 1998 - 2010
Pearson Software Consulting, LLC
www.cpearson.com
(e-mail address removed)

Good morning Chip,

Thank you very much for your patience and continuing to help me.

I changed my sub procedure to "Workbook_BeforeClose" from "Auto_Close".
When I tested it, somehow, the code in the Workbook_BeforeClose is not
executed. Therefore, the button is still not deleted from the Standard
toolbar.

Am I doing something wrong?

Below please find the 3 sub procedures that I current have and have tested
on, and all 3 subs are in General Module. Should the Workbook_BeforeClose in
ThisWorkbook?

Please take a look up all 3 procedures to see where I did wrong. Thanks
again.

Private Sub Autpen()

Dim nBar As Variant
Dim nCon As Variant

Workbooks ("Excel Macro File.xls").Windows(1).Visible = False

Set nBar = CommandBars("Standard")
nBar.Visible = True
Set nCon = nBar.Controls.Add(Type:=msoControlButton, Temporary:=True)
With nCon
.BeginGroup = True
.Style = msoButtonCaption
.Caption = "Macro"
.OnAction = "RunMacro"
.Tag = "MacroTag"
End With

End Sub


Private Sub Workbook_BeforeClose()

Dim C As Office.CommandBarControl
On Error Resume Next
MsgBox "Can you see this message?", vbCritical, "Can you see me now?"
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Do Until C Is Nothing
C.Delete
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Loop

MsgBox "Goodbye....", vbInformation, "Exiting...."

End Sub

Private Sub Macro()

Dim PROMPT As String

PROMPT = Msgbox(PROMPT:="Message", Buttons:=vbYesNo + vbQuestion,
Title:="Macro Title")

If PROMPT = vbNo Then
MsgBox "The macro is terminated.",vbInformation,"Macro Title"

Else
'The code to execute

End If

Workbooks("Excel Macro File.xls").Close False

End Sub

When working with Autpen and Auto_Close, keep in mind that these
procedures are NOT called when the workbook is opened or closed with
code. For example,

Sub AAA()
Workbooks.Open "C:\Book1.xls"
End Sub

With this code, the Autpen procedure in Book1.xls will not run.
Similarly,

Sub BBB()
Workbooks("Book1.xls").Close
End Sub

Here, the Auto_Close procedure in Book1.xls will not run.

However, the Workbook_Open and Workbook_BeforeClose procedures do run
when a file is opened or closed via code.

Cordially,
Chip Pearson
Microsoft MVP 1998 - 2010
Pearson Software Consulting, LLC
www.cpearson.com
[email on web site]





On Thu, 6 May 2010 19:56:01 -0700, Accesshelp

Dave,

I inserted a msgbox at the beginning and ending of Auto_Close, and none of
the message boxes showed up. Apparently, the code in Auto_Close did not get
executed.

Below is the structure of my "Macro" (one of the 3 subs, besides Autpen
and Auto_Close) sub:

Private Sub Macro()

Dim PROMPT As String

PROMPT = Msgbox(PROMPT:="Message", Buttons:=vbYesNo + vbQuestion,
Title:="Macro Title")

If PROMPT = vbNo Then
MsgBox "The macro is terminated.",vbInformation,"Macro Title"

Else
'The code to execute

End If

Workbooks("Excel Macro File.xls").Close False

End Sub


I know that the "Excel Macro File.xls" closes because I tested by adding a
msgbox right above the Workbooks("Excel Macro File.xls").Close False code.
Somehow, the code in Auto_Close is completely ignored.

By looking at the structure of Macro sub from above, can you think of any
reason that would triggle not to read the the code in Auto_Close?

In addition to the testing from above, I also did another testing. I added
the code in Auto_Close as part of "Macro" sub, and the code was added right
before "Workbooks("Excel Macro File.xls").Close False". When I executed the
"Macro" code, the Excel window just froze.

Am I doing something wrong?

Thank you again very much for continuing to help me.




:

So when you added the msgbox to the auto_close procedure, did you see it when
the macro workbook closed?

Are you positive that you used the same tag in both the Autpen and Auto_Close
procedures. Yeah, I know that you posted code that was correct. But sometimes
what's posted can be changed (ever so slightly).



Accesshelp wrote:

Dave,

First of all, all 3 subs are in general module.

Secondly, I followed your steps from your last post, and I did not see the
button on the Excel file (that I execute the macro on) after I closed and
reopened.

However, I do still see the button in the following situation.

I open the Excel file ("Excel Data File") for which I want to execute my
macro on. Then I open the macro file in the same Excel window, and the
button is created on the Standard toolbar after the macro file is opened. I
click on the button to run the macro, and the macro executes the code. After
the macro finishes with the execution, the macro file closes, and the "Excel
Data File" and the Excel window still open. At that time, the button should
remove/delete from the Standard toolbar, but it's not.

That is where I have a problem with.

Thank you very much for your patience and continuing to help me.

:

That code worked perfectly fine for me.

After you close the workbook, clean up that toolbar manually -- just to make
sure there's nothing wrong to start.

Then load your workbook with the macros.

Do you see the new button?

Close the workbook.

Did the button disappear?

ps.

Add a msgbox to the top of each procedure:

msgbox "Autpen running"
and
msgbox "Auto_Close running"

Just to make sure that both are running when they should. (You do have them in
a General module, right? They don't belong in the ThisWorkbook module or behind
a worksheet.)

Accesshelp wrote:

Dave,

As you instructed, I used Chip's code in both Autpen and Auto_Close, and
when I tried it, the button is still on the Standard toolbar after the macro
file closes.

The followings are the code that I have in Autpen and Auto_Close,
respectively:

Private Sub Autpen()

Dim nBar As Variant
Dim nCon As Variant

Set nBar = CommandBars("Standard")
nBar.Visible = True
Set nCon = nBar.Controls.Add(Type:=msoControlButton, Temporary:=True)
With nCon
.BeginGroup = True
.Style = msoButtonCaption
.Caption = "Macro"
.OnAction = "RunMacro"
.Tag = "MacroTag"
End With

End Sub

Private Sub Auto_Close()

Dim C As Office.CommandBarControl
On Error Resume Next
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Do Until C Is Nothing
C.Delete
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Loop

End Sub

I do not have duplicate command buttons. There is only one button.

Thanks.

"Dave Peterson" wrote:

 

[Dave Peterson]

This worked fine for me -- all this code goes into a General module:

Option Explicit
Sub auto_open()
Dim nBar As CommandBar
Dim nCon As CommandBarButton

Set nBar = CommandBars("Standard")
nBar.Visible = True
Set nCon = nBar.Controls.Add(Type:=msoControlButton, Temporary:=True)
With nCon
.BeginGroup = True
.Style = msoButtonCaption
.Caption = "Macro"
.OnAction = "RunMacro"
.Tag = "MyTag" '<<<< ADDED
End With

End Sub
Sub Auto_Close()
MsgBox "auto_close"

Dim C As Office.CommandBarControl
On Error Resume Next
Set C = Application.CommandBars.FindControl(Tag:="MyTag")
Do Until C Is Nothing
C.Delete
Set C = Nothing
Set C = Application.CommandBars.FindControl(Tag:="MyTag")
Loop
End Sub
Sub CloseMe()
ThisWorkbook.Close savechanges:=False
End Sub
Sub RunMacro()
MsgBox "hi"
Dim resp As Long

resp = MsgBox(Prompt:="clean up?", Buttons:=vbYesNo)

If resp = vbYes Then
Application.OnTime earliesttime:=Now, procedure:="Auto_Close"
Application.OnTime earliesttime:=Now + TimeSerial(0, 0, 1), _
procedure:="CloseMe"
End If
End Sub

And if you wanted to use the Workbook events, all this code goes in the
ThisWorkbook module:

Option Explicit
Private Sub Workbook_Open()

Dim nBar As CommandBar
Dim nCon As CommandBarButton

Set nBar = Application.CommandBars("Standard")
nBar.Visible = True
Set nCon = nBar.Controls.Add(Type:=msoControlButton, Temporary:=True)
With nCon
.BeginGroup = True
.Style = msoButtonCaption
.Caption = "Macro"
.OnAction = "RunMacro"
.Tag = "MyTag" '<<<< ADDED
End With

End Sub
Private Sub Workbook_BeforeClose(Cancel As Boolean)

MsgBox "before_close"

Dim C As Office.CommandBarControl
On Error Resume Next
Set C = Application.CommandBars.FindControl(Tag:="MyTag")
Do Until C Is Nothing
C.Delete
Set C = Nothing
Set C = Application.CommandBars.FindControl(Tag:="MyTag")
Loop

End Sub

But this code still goes into a General module:

Option Explicit
Sub CloseMe()
ThisWorkbook.Close savechanges:=False
End Sub
Sub RunMacro()
MsgBox "hi"
Dim resp As Long

resp = MsgBox(Prompt:="clean up?", Buttons:=vbYesNo)

If resp = vbYes Then
Application.OnTime earliesttime:=Now, procedure:="CloseMe"
End If
End Sub

===========

This was the question that Chip asked yesterday -- was the button trying to
destroy itself?

Since it can't do that, you can have code that says: Wait a second, then delete
it using a different procedure (that .ontime stuff).

 

[Accesshelp]

Dave,

I updated my code with your code from below for General module, and I made
some minor changes. The change that I made was I only took the following two
lines from "Macro" Sub:

Application.OnTime earliesttime:=Now, procedure:="Auto_Close"
Application.OnTime earliesttime:=Now + TimeSerial(0, 0, 1), _
procedure:="CloseMe"


After I made the update, the macro worked perfectly. It deleted the button
from the toolbar without any freeze/delay. I think the code from above fixes
the delay and forces not to have any delay.

If I may, I would like to ask you some questions.

Without the code from above, why would you think there is a freeze/delay in
deleting the button? In addition, why do we need an additional sub to close
the macro file? Why can't we have a code to close the macro file within
Macro sub?

Thank you very much for your time and patience.

 

[Dave Peterson]

I don't see any difference (besides indenting) for those two lines. What change
did you make?

The problem was deleting the control from the code that the control is running.
That was Chip's point in that other post.

So once the procedures were separated (using that .ontime stuff), the problem
went away.

 

[Accesshelp]

Chip,

I want to thank you and Dave very much for your time and patience for
helping me with my problem. That was a long ride. You and Dave have helped
me solved the problem. In addition, I have learned a lot from you guys.

Thanks again. Have a great weekend!

on, and all 3 subs are in General Module. Should the Workbook_BeforeClose in
ThisWorkbook?

The Workbook_Open and Workbook_BeforeClose procedures MUST reside in
the ThisWorkbook code module, not a regular code module. For any
event, VBA looks for code only in the object module attached to the
object that triggers the event. Therefore, all Workbook_* events must
be in ThisWorkbook, and all Worksheet_* events must be in the
appropriate Sheet's code module. If the event code is elsewhere, VBA
will not find it and thus not execute it. See
http://www.cpearson.com/Excel/Events.aspx for much more info about
events.

If you want, you can email me the workbook and I'll have a look at it.
Cordially,
Chip Pearson
Microsoft MVP 1998 - 2010
Pearson Software Consulting, LLC
www.cpearson.com
(e-mail address removed)

Good morning Chip,

Thank you very much for your patience and continuing to help me.

I changed my sub procedure to "Workbook_BeforeClose" from "Auto_Close".
When I tested it, somehow, the code in the Workbook_BeforeClose is not
executed. Therefore, the button is still not deleted from the Standard
toolbar.

Am I doing something wrong?

Below please find the 3 sub procedures that I current have and have tested
on, and all 3 subs are in General Module. Should the Workbook_BeforeClose in
ThisWorkbook?

Please take a look up all 3 procedures to see where I did wrong. Thanks
again.

Private Sub Autpen()

Dim nBar As Variant
Dim nCon As Variant

Workbooks ("Excel Macro File.xls").Windows(1).Visible = False

Set nBar = CommandBars("Standard")
nBar.Visible = True
Set nCon = nBar.Controls.Add(Type:=msoControlButton, Temporary:=True)
With nCon
.BeginGroup = True
.Style = msoButtonCaption
.Caption = "Macro"
.OnAction = "RunMacro"
.Tag = "MacroTag"
End With

End Sub


Private Sub Workbook_BeforeClose()

Dim C As Office.CommandBarControl
On Error Resume Next
MsgBox "Can you see this message?", vbCritical, "Can you see me now?"
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Do Until C Is Nothing
C.Delete
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Loop

MsgBox "Goodbye....", vbInformation, "Exiting...."

End Sub

Private Sub Macro()

Dim PROMPT As String

PROMPT = Msgbox(PROMPT:="Message", Buttons:=vbYesNo + vbQuestion,
Title:="Macro Title")

If PROMPT = vbNo Then
MsgBox "The macro is terminated.",vbInformation,"Macro Title"

Else
'The code to execute

End If

Workbooks("Excel Macro File.xls").Close False

End Sub

When working with Autpen and Auto_Close, keep in mind that these
procedures are NOT called when the workbook is opened or closed with
code. For example,

Sub AAA()
Workbooks.Open "C:\Book1.xls"
End Sub

With this code, the Autpen procedure in Book1.xls will not run.
Similarly,

Sub BBB()
Workbooks("Book1.xls").Close
End Sub

Here, the Auto_Close procedure in Book1.xls will not run.

However, the Workbook_Open and Workbook_BeforeClose procedures do run
when a file is opened or closed via code.

Cordially,
Chip Pearson
Microsoft MVP 1998 - 2010
Pearson Software Consulting, LLC
www.cpearson.com
[email on web site]





On Thu, 6 May 2010 19:56:01 -0700, Accesshelp

Dave,

I inserted a msgbox at the beginning and ending of Auto_Close, and none of
the message boxes showed up. Apparently, the code in Auto_Close did not get
executed.

Below is the structure of my "Macro" (one of the 3 subs, besides Autpen
and Auto_Close) sub:

Private Sub Macro()

Dim PROMPT As String

PROMPT = Msgbox(PROMPT:="Message", Buttons:=vbYesNo + vbQuestion,
Title:="Macro Title")

If PROMPT = vbNo Then
MsgBox "The macro is terminated.",vbInformation,"Macro Title"

Else
'The code to execute

End If

Workbooks("Excel Macro File.xls").Close False

End Sub


I know that the "Excel Macro File.xls" closes because I tested by adding a
msgbox right above the Workbooks("Excel Macro File.xls").Close False code.
Somehow, the code in Auto_Close is completely ignored.

By looking at the structure of Macro sub from above, can you think of any
reason that would triggle not to read the the code in Auto_Close?

In addition to the testing from above, I also did another testing. I added
the code in Auto_Close as part of "Macro" sub, and the code was added right
before "Workbooks("Excel Macro File.xls").Close False". When I executed the
"Macro" code, the Excel window just froze.

Am I doing something wrong?

Thank you again very much for continuing to help me.




:

So when you added the msgbox to the auto_close procedure, did you see it when
the macro workbook closed?

Are you positive that you used the same tag in both the Autpen and Auto_Close
procedures. Yeah, I know that you posted code that was correct. But sometimes
what's posted can be changed (ever so slightly).



Accesshelp wrote:

Dave,

First of all, all 3 subs are in general module.

Secondly, I followed your steps from your last post, and I did not see the
button on the Excel file (that I execute the macro on) after I closed and
reopened.

However, I do still see the button in the following situation.

I open the Excel file ("Excel Data File") for which I want to execute my
macro on. Then I open the macro file in the same Excel window, and the
button is created on the Standard toolbar after the macro file is opened. I
click on the button to run the macro, and the macro executes the code. After
the macro finishes with the execution, the macro file closes, and the "Excel
Data File" and the Excel window still open. At that time, the button should
remove/delete from the Standard toolbar, but it's not.

That is where I have a problem with.

Thank you very much for your patience and continuing to help me.

:

That code worked perfectly fine for me.

After you close the workbook, clean up that toolbar manually -- just to make
sure there's nothing wrong to start.

Then load your workbook with the macros.

Do you see the new button?

Close the workbook.

Did the button disappear?

ps.

Add a msgbox to the top of each procedure:

msgbox "Autpen running"
and
msgbox "Auto_Close running"

Just to make sure that both are running when they should. (You do have them in
a General module, right? They don't belong in the ThisWorkbook module or behind
a worksheet.)

Accesshelp wrote:

Dave,

As you instructed, I used Chip's code in both Autpen and Auto_Close, and
when I tried it, the button is still on the Standard toolbar after the macro
file closes.

The followings are the code that I have in Autpen and Auto_Close,
respectively:

Private Sub Autpen()

Dim nBar As Variant
Dim nCon As Variant

Set nBar = CommandBars("Standard")
nBar.Visible = True
Set nCon = nBar.Controls.Add(Type:=msoControlButton, Temporary:=True)
With nCon
.BeginGroup = True
.Style = msoButtonCaption
.Caption = "Macro"
.OnAction = "RunMacro"
.Tag = "MacroTag"
End With

End Sub

Private Sub Auto_Close()

Dim C As Office.CommandBarControl
On Error Resume Next
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Do Until C Is Nothing
C.Delete
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Loop

End Sub

I do not have duplicate command buttons. There is only one button.

Thanks.

"Dave Peterson" wrote:

 

[Accesshelp]

Dave,

The followings are what I have now:

Private Sub Autpen()

Dim nBar As CommandBar
Dim nCon As CommandBarButton

Workbooks ("Excel Macro File.xls").Windows(1).Visible = False

Set nBar = CommandBars("Standard")
nBar.Visible = True
Set nCon = nBar.Controls.Add(Type:=msoControlButton, Temporary:=True)
With nCon
.BeginGroup = True
.Style = msoButtonCaption
.Caption = "Macro"
.OnAction = "RunMacro"
.Tag = "MacroTag"
End With

End Sub


Private Sub Auto_Close()

Dim C As Office.CommandBarControl
On Error Resume Next
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Do Until C Is Nothing
C.Delete
Set C = Nothing
Set C = Application.CommandBars.FindControl(Tag:="MacroTag")
Loop

End Sub

Private Sub Macro()

Dim PROMPT As String

PROMPT = Msgbox(PROMPT:="Message", Buttons:=vbYesNo + vbQuestion,
Title:="Macro Title")

If PROMPT = vbNo Then
MsgBox "The macro is terminated.",vbInformation,"Macro Title"

Else
'The code to execute

End If

Application.OnTime EarliestTime:=Now, Procedure:="Auto_Close"
Application.OnTime EarliestTime:=Now + TimeSerial(0, 0, 1),
Procedure:="CloseMe"
End Sub

Private Sub CloseMe()
ThisWorkbook.Close SaveChanges:=False
End Sub

The only big changes that I made were having CloseMe sub and the following
two lines in Macro sub:

Application.OnTime EarliestTime:=Now, Procedure:="Auto_Close"
Application.OnTime EarliestTime:=Now + TimeSerial(0, 0, 1),
Procedure:="CloseMe"

I think the above two lines made it worked.

Thank you and Chip again very much for your time and patience. That was a
long ride. Have a great weekend!

 

[Dave Peterson]

I don't see the any difference in the CloseMe sub and I still don't see any
difference in those two ontime lines.

But glad you have it working. Have a good weekend your own self <bg>.